Specifications

Non pressure solar water heating system
1.easy to install
2.high heating efficiency
3.assistant tank 5L 8L 20L 50L

 

 

 

Non pressure solar water heating system with assistant tank

 

Features:

1. Similar as the normal non-pressure type.the difference is the big tank with a feeder tank on the top.

2.From the drawing of installation of XKNP with feeder tank you could see the internal structure.when

the water in the big tank get heating would produce some steam out,because of the air vent inside the

feeder tank,so it would inflow inside the feeder tank.That could avoid waste water source.

3.The floater on the feeder tank could load the water automatically

 

 

Non pressure solar water heating system with  assistant tank  

 

Working principle:

 

This system relies on natural circulation, the water in vacuum tube will be hot after the coating layer

absorbs solar energy. As we know, hot water is lighter and cold water is heavier, so hotter water will

flows into tank and colder water will flow to vacuum tube bottom, this circulation continues because

of different water temperature between the tank and vacuum tube. At last, the water temperature in tank

and vacuum tube will be the same, and circulation will stop. Then you can get hot water after several hours.

 

 

A-sun Non-pressure solar water heater with assistant tank
Model	Tube Quantity	Tank capacity	Volume(m3)
			Frame(m3)	vacuum tube (m3)	Tank(m3)	Total
XKANP58-1800-15	15	150L	0.066	0.159	0.332	0.56
XKANP58-1800-18	18	180L	0.066	0.198	0.387	0.65
XKANP58-1800-20	20	200L	0.066	0.217	0.425	0.71
XKANP58-1800-24	24	240L	0.07	0.263	0.5	0.83
XKANP58-1800-30	30	300L	0.087	0.319	0.612	1.02
XKANP58-1800-36	36	360L	0.105	0.394	0.725	1.22
Assistant tank		5L	29*23.5*23.5
		8L	26*26*32			0.016
		20L	35*35*50			0.061
		50L	45*45*69			0.14