Specifications

Tower parking system lifts the vehicle and load sweep template with the lifting power and the shifting device of hoister,

Tower parking system can shift the vehicle and car contained plate with the lifting power and the shifting device of hoister, so that to fulfill storage and depart of the vehicle in this auto-parking system.

 

Features:

High utilization rate of land: the floor space of one tower parking system is only 50 square meters, which can up to 25 layers and store 40 to 50 vehicles, make full use of space;

Low vibration and low noise: use the advanced elevator principle to make sure the quiet, smooth and no noise in working;

It can store 50 vehicles with the height about 48 meters or 40 vehicles about 40 meters, and also have the model that can accommodate enough space for high car roof;

The parking system can be set up together with buildings or independently, so concrete or steel structure is optional for the wall;

With automatic lifting,rotating and shifting devices, very easy and convenient to park and retrieve the car.

 

Application:

The tower parking systems are widely used in the place with very limit space, such as office towers, hospitals, shopping center, etc.

 

 

Details	Parameters
Lifting Motor Power	22kw
Lifting Speed	60-90m/min
Shifting Motor Power	0.75kw
Shifting Speed	25m/min
Rotary Motor Power	1.5kw
Rotary Speed	3.7r/min
Auto-door Power	0.12kw
Operation	Touch panel
Control Mode	VVVF/PLC
Power Supply	3 phases 5 lines, 380VAC/50Hz(lighting 220VAC 50Hz)
Outside Wall	Steel structure or concrete
Getting Car Time	53s
Full Height	1.4M(pit underground)+2.225M(ground floor)+1.68M*(N-1)+3.485M(buffer height)+2.15M(machine room)
Overall Length	6300mm
Overall Width	6480mm
Safety Protection Device	Anti-drop, over-load, emergency stop, limit switch, fault alarm, etc.