Specifications

1.Pellet gniter for wood pellets burners
2.more than 800deg.C
3.Heating up in 20s
4.Long life
5.Meet Rohs

 HIGHLY DURABLE AND ENERGY-EFFICIENT XIAMEN GREEN WAY’S IGNITER

----ceramic hot surface igniters for the sake of environment.

 

Xiamen Green Way  is your best choice for high level quality and best price ceramic igniter for biomass

burnerswith the advantages of long service time, fast heating rate, energy-efficient and eco-friendly.

 

Characteristic

1.High temperature-resistance ceramic heating element which can reach a permanent working temperature

 above 750°C

 

2.Energy saving, super fast heating-up

 

3.Air can through and around inside and outside of the heater.

Heat can be transfered from both inside and ouside of the heating element.

 

4.Electrically oxidation and corrosion-resistant

 

5.High load-bearing capacity(thermal shock resistance, cycles)

 

5.Customization the igniters according to customers’ specific requirement.

 

 Application

 

 

One special application area for Green Way’s high temperature ceramic igniters is in heating systems that

use solid fuels such as wood pellets as energy source. The challenge here is to ignite the biomass in a very

short time while retaining very low emission values. This can be perfectly achieved by Green Way’s hot surface

ceramic igniters.

 

Ceramic hot surface igniters for pellet boilers need only approx. 1/10 of the energy of that needed by

hot air fans and ignition blowers. Their ignition capacity lies between 120 and 200 Watt. Depending on

the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely

short. This also means minimal emissions!

 

 

Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible.

 

1	Part No.	G78105-2
2	Usage	ceramic igniter for Pellet burner
3	Working Voltage	230VAC
4	Power	150--230(W)
5	Dimension	L=94mm; D=17.5mm (standard igniter)
6	Silicon Cable	500mm long
7	Advantages	(1)Ready assembled, easy-to-install systems.   (2)Ready to fit solution: High temperature heating element in temperature-resistant ceramic socket   (3)Space-saving, noiseless and impervious to overheating.    (4)Element temperature: over 1000 °C in permanent and alternating operation, for a short time up to 1200 °C    (5)Lifetime up to 100,000 heating cycles, depending on operating conditions    (6)Minimal energy consumption    (7)Ignition through air heating: Due to extremely high heater temperature and ideal geometric conditions, air is heated in a very short time to very high temperatures – the ideal ignition blower!   (8)Igniting wood chips, firewood, coal bricks or other biomass (corn, etc.) is possible.

 

 

 

~~~Kinds of Inspection before Goods Delivery~~~

 

Here in Greenway, all heater should do 100% Inspections before delivery.Such as Apprearance

Test,Straightness  Test,Dimension Test,Power-On Test,Dielectric Test and Resistance Distinguish.

 

~~~Simple Making Process~~~