Specifications

Xiamen Green Way  is your best choice for high level quality and best price wood pellet lighter for

biomass boiler with the advantages of long service time, fast heating rate, energy-efficient and eco-friendly.

Characteristic

1.High temperature-resistance ceramic heating element for wood piezo igniter which can reach

   a permanent working  temperature above 750°C

2.Energy saving, super fast heating-up

3.Air can through and around inside and outside of the heater.

Heat can be transfered from both inside and ouside of the heating element.

4.Electrically oxidation and corrosion-resistant

5.High load-bearing capacity(thermal shock resistance, cycles)

5.Customization the igniters according to customers’ specific requirement.

Application

One special application area for Green Way’s high temperature ceramic igniters/wood pellet

lighter is in heating systems that use solid fuels such as wood pellets as energy source. The

challenge here is to ignite the biomass in a very short time while retaining very low emission values.

This can be perfectly achieved by Green Way’s hot surface ceramic pellet igniter.

Ceramic hot surface igniters/wood piezo igniter for pellet boiler need only approx. 1/10 of the

energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 

120 and 200 Watt. Depending on the positioning of the ignition element in the boiler, the ignition

time of approx. 60 seconds is extremely short. This also means minimal emissions!

Igniting wood chips, firewood, coal bricks or other biomass (such as corn, etc.) is possible. 

Mass customization is available.