Eco-Friendly MCH Ceramic Heating Element for Hair Straighterner Quality Choice
USD $0.5 - $100 /Piece
Min.Order:100 Pieces
Xiamen Green Way Electronic Technology Co., Ltd.
We can supply the products according to customer's drawings, samples and performance requirement.
Ceramic heating element for hair curling, straightener ,oven, dryers, water.
It enjoys great advantages of its compact size, light weight, energy saving and long life time.
Ceramic Heater Usual Specification:
Dimension: accordingly
Voltage: 13V-230V
Resistance: accordingly
Dielectric strength: 3750V, 5s, Leakage current ≤ 0.5mA
Flexural strength: ≥300Mpa
1.10*10*1.3mm |
|
|
|
|
|
|
|
Specification | Models | length | width | thickness | leads | φleads | |
10*10*1.3 ( 2.0 ) | 24/12V | 9ohm | 10 | 10 | 1.3(2.0) | 75 | 0.5 |
10*10*1.3(2.0) | 24/12V | 13ohm | 10 | 10 | 1.3(2.0) | 75 | 0.5 |
1.20*10*1.3mm | |||||||
Specification | Models | length | width | thickness | leads | φleads | |
20*10*1.3( 2.0 ) | 24/12V | 10ohm | 20 | 10 | 1.3(2.0) | 75 | 0.5 |
20*10*1.3(2.0) | 24/12V | 15ohm | 20 | 10 | 1.3(2.0) | 75 | 0.5 |
20*10*1.3(2.0) | 24/12V | 20ohm | 20 | 10 | 1.3(2.0) | 75 | 0.5 |
30*25*1.3mm | |||||||
Specification | Models | length | width | thickness | leads | φleads | |
30*25*1.3(2.0) | 24VAC | 20ohm | 30 | 25 | 1.3(2.0) | 75 | 0.5 |
30*25*1.3(2.0) | 24VAC | 25ohm | 30 | 25 | 1.3(2.0) | 75 | 0.5 |
30*25*1.3(2.0) | 24VAC | 30ohm | 30 | 25 | 1.3 ( 2.0 ) | 75 | 0.5 |
30*25*1.3(2.0) | 24VAC | 30ohm | 30 | 25 | 1.3 ( 2.0 ) | 75 | 0.5 |
55*10*1.3mm | |||||||
Specification | Models | length | width | thickness | leads | φleads | |
55*10*1.3(2.0) | 3.7V | 0.30ohm | 55 | 10 | 1.3(2.0) | 75 | 0.5 |
55*10*1.3(2.0) | 3.7V | 0.35ohm | 55 | 10 | 1.3(2.0) | 75 | 0.5 |
55*10*1.3(2.0) | 3.7V | 0.40ohm | 55 | 10 | 1.3 ( 2.0 ) | 75 | 0.5 |
55*10*1.3(2.0) | 3.7VAC | 0.50ohm | 55 | 10 | 1.3 ( 2.0 ) | 75 | 0.5 |
Ceramic heating elements for hair curling and straightening. It can be applicable to a variety of hair quality product because moderate temperature distribution can be obtained by the heater design.