CNC Condenser Bender

Use: used to bend condensers at an angle and make them change "L" shape or "U" shape to fulfill overall design in air conditioner and the requirement of product technique

Features:
1) Three axes CNC, accurate location and smooth bend
2) High degree of automation and convenient adjustment
3) The fins do not fall easily

Specifications:
1) Wall thickness of coil: 22mm / layer, max. three layers, numerical setting
2) Bending radii: R69 (1-3 layers), can be made to order
3) Bending angle: 0-110°, numerical setting
4) Precision bend ±0.1°, platform up and down±0.1 mm,
locating±0.1mm
5) Locating length of coil 400mm-1,000mm pre-location
6) Control mode: jog, manual, auto
7) Max. width of coil: 900mm/1,200mm/1,500mm
8) Max. length of coil: 2,500mm
9) Short edge length of bend:
a) The first layer: ≥60mm
b) The second layer: ≥80mm
c) The third: ≥110mm
10) Clamping travel of coil: 150mm
11) Travel of platform up and down: 0-120mm
12) Cycle of auto working: 12-15s
13) Air pressure range: 0.3-0.5MPa
14) Power supply: three-phase, four-wire, AC 415V 50Hz
15) Total power: 4.5kW
16) Gross weight: 1,600kg