Overload protection 5S 16V 25A 460W Lithium Iron Phosphate (LFP) battery charger
USD $50 - $200 /Piece
Min.Order:5 Pieces
Features:
1. 3 Stages Charging: 1st-25% of rating current; 2nd-50% of rating current; 3rd-100% of rating current (equalizer).
2. Automatic Re-charging Battery: If the battery voltage <3.1V/cell after full charged, the charger will automatic re-charging the battery.
3. Short-circuit Protection: Charger O/P cut-off automatically when short circuit
4. Overload Protection: Charger O/P current-limited automatically when overload.
5. Reverse Polarity Protection: Charger O/P cut-off automatically when battery reverse connection.
6. Unique Digitalt Meter Display: Indicating charging voltage, current, battery capacity (percent and AH) and charger status (timer, pre-charge,.....)
7. 3 LED Display: Red(power), green(full charged) & orange(equalizer charge)
Specifications
Model | 15V(5S) | C15A25 |
Output | Equalizer Charger | 18.25V |
Current Max | 25A | |
Current(Cut-off) | 2.5A | |
Pre-charger 1(25%) | 6.3A | |
Pre-charger 2(50%) | 12.5A | |
Wattage | 460W | |
Efficiency | >85%(at full load) | |
Input | Voltage | 100~120V |
Frequency | 57~63Hz | |
Protection | Battery Reverse | Yes, Automatic Shutdown |
Short Circuit | Yes, Automatic Shutdown | |
Overload | Yes,Current Limited | |
Cooling Fan | Speed Controlled by Charging Stage | |
Mechanical | Dimensions | 152*70*275mm |
Weight | 2.4kgs |
1.3S,5S,6S,7S,9S,10S,11S,and other cells is available upon receiving customer's request
2.The above specifications issubject to change without prior notice
Operations:
1. Connect the charger system to a wall receptacle strongly.
2. Connect the alligator clips to battery terminals (red clip--->positive terminal; black clip--->negative terminal)
3. Turn on the power switch which is located on the front panel of charger, then the red LED lits and bi-color LED will confirm the charger's stage. And also the Digital meter will confirm the charger's O/P voltage, current and battery level.
Notices:
1. Our Charger was designed for charging LiFEPO4 and Lithium type batteries only.
2. Not to recharging non-rechargeable batteries.
3. The battery charger must only be plugged into an earthed socket-outlet.
4. Always place the charger in well ventiated and dry environments.
5. The battery charger was designed by aluminum housing as itself heat sink, avoid touching the case for safety purpose because the temperature is about 50 degree C on the case when charging.
If your purchase order quantity over than 50pcs or even 100pcs, you could get much more competitive price from us.
For More IInformation Please Visit Our Website
YESA TECHNOLOGY CO.,LTD
ADDRESS: NO.1504 LAUNCH INDUSTRAL ZONE , NORTH OF WUHE RD,
BANTIAN ,LONGGANG, SHENZHEN,CHINA. PC:518129
TEL:86-755-88855368 82376820 18138267260
FAX:86-755-82379471