Name: 18.25v 25A 5S 16V LiFePO4 Battery Charger
Brand: Yesa
Availability: InStock

Product Details

Product Description

Features:
1. 3 Stages Charging: 1st-25% of rating current; 2nd-50% of rating current; 3rd-100% of rating current (equalizer).
2. Automatic Re-charging Battery: If the battery voltage <3.1V/cell
after full charged, the charger will automatic re-charging the battery.
3. Short-circuit Protection: Charger O/P cut-off automatically when short circuit
4. Overload Protection: Charger O/P current-limited automatically when overload.
5. Reverse Polarity Protection: Charger O/P cut-off automatically when battery reverse connection.
6. Unique Digitalt Meter Display: Indicating charging voltage, current, battery capacity (percent and AH) and charger status (timer, pre-charge,.....)
7. 3 LED Display: Red(power), green(full charged) & orange(equalizer charge)

Specifications

Model	15V(5S)	C15A25
Output	Equalizer Charger	18.25V
	Current Max	25A
	Current(Cut-off)	2.5A
	Pre-charger 1(25%)	6.3A
	Pre-charger 2(50%)	12.5A
	Wattage	460W
	Efficiency	>85%(at full load)
Input	Voltage	100~120V
Input	Frequency	57~63Hz
Protection	Battery Reverse	Yes, Automatic Shutdown
	Short Circuit	Yes, Automatic Shutdown
	Overload	Yes,Current Limited
	Cooling Fan	Speed Controlled by Charging Stage
Mechanical	Dimensions	15270275mm
Mechanical	Weight	2.4kgs

1.3S,5S,6S,7S,9S,10S,11S,and other cells is available upon receiving customer's request

2.The above specifications issubject to change without prior notice

Operations:
1. Connect the charger system to a wall receptacle strongly.
2. Connect the alligator clips to battery terminals (red clip--->positive terminal; black clip--->negative terminal)
3. Turn on the power switch which is located on the front panel of charger, then the red LED lits and bi-color LED will confirm the charger's stage. And also the Digital meter will confirm the charger's O/P voltage, current and battery level.

Notices:
1. Our Charger was designed for charging LiFEPO4 and Lithium type batteries only.
2. Not to recharging non-rechargeable batteries.
3. The battery charger must only be plugged into an earthed socket-outlet.
4. Always place the charger in well ventiated and dry environments.
5. The battery charger was designed by aluminum housing as itself heat sink, avoid touching the case for safety purpose because the temperature is about 50 degree C on the case when charging.