Mixers, buy Planet Blender on China Suppliers Mobile

Product Details

Planet Blender :

Product Description

Planet blender is a new mixing machine with high performance, high efficiency, easy to clean and to maintain, which is

innovated and improved based on the introduced oversea advanced technology. The Dual agitators of this equipment rotate

and at the same time revolve around the axle, the agitators are divided by the viscosity and characteristics of the material,

usually include paddle type, twist type, claw type, frame type etc., have good mixing, reacting, kneading, dissolving effect.

The mixer is equipped with a separate set of scraper to scrape the sides of the barrel and the mixing paddle can be added

a scraper as well, so that it can scrape the bottom of the barrel and avoid dead corner to ensure the stability of the product.

Lithium Planetary Mixer adopts planetary gear wheel drive, there is a large output torque, suitable for high temperature, high solids,high viscosity, and other difficult working conditions; This equipment is closed design, can be used with a vacuum system to realize vacuum mixing, mixing bucket can be designed

with a heating jacket, matching mold temperature controller, to realize thermostatic mixing function, it’s the first choice of

mixing equipment for the high-viscosity materials.

[Applicable Materials]: Various slurries with viscosity less than 3,000,000cps, solid content under 90% such as battery paste,

solder paste, ceramic paste, silicone inks, sealants, structural adhesives, soft cream, jam etc..

Technical Parameter

Model	Working volume (L)	Mixing power (kw)	Revolving speed (rpm)	Rotating speed (rpm)	Scraper speed (rpm)	Lifting mode	Lift (mm)	Hydraulic power (kw)	Vacuum pump power (kw)		Material
SXJB-8	5	1.5	0-65	0-170	0-170	Hydraulic lifting	300	0.75	0.37	Material contacting part SS304
SXJB-15	12	2.2	0-65	0-170	0-170	Hydraulic lifting	350	0.75	0.55	Material contacting part SS304
SXJB-30	24	4	0-65	0-170	0-170	Hydraulic lifting	500	1.1	1.5	Material contacting part SS304
SXJB-50	40	5.5	0-65	0-170	0-170	Hydraulic lifting	500	1.1	1.5	Material contacting part SS304
SXJB-100	80	7.5	0-30	0-95	0-95	Hydraulic lifting	650	1.5	2.2	Material contacting part SS304
SXJB-200	160	11	0-30	0-95	0-95	Hydraulic lifting	750	2.2	2.2	Material contacting part SS304
SXJB-300	240	15	0-30	0-95	0-95	Hydraulic lifting	900	3	4	Material contacting part SS304
SXJB-500	400	22	0-30	0-65	0-65	Hydraulic lifting	1000	4	4	Material contacting part SS304
SXJB-800	640	30	0-30	0-65	0-65	Hydraulic lifting	1100	4	5.5	Material contacting part SS304
SXJB-1000	800	37	0-30	0-65	0-65	Hydraulic lifting	1200	5.5	7.5	Material contacting part SS304
SXJB-1200	960	45	0-30	0-65	0-65	Hydraulic lifting	1300	5.5	11	Material contacting part SS304
SXJB-1500	1200	55	0-30	0-65	0-65	Hydraulic lifting	1400	7.5	11	Material contacting part SS304
SXJB-2000	1600	75	0-30	0-65	0-65	Hydraulic lifting	1500	11	15	Material contacting part SS304

Remark:

*Capacity is tested based on the materials viscosity 200,000cps; The model selection shall be based on the data such as the

materials viscosity, characteristic etc.

* If the working condition is high temperature, high pressure, flammable, explosive, corrosive or others, you must provide detailed

data for our engineer to customize specially.

* If any change in the above table, subject shall prevail without notice.
* The table cannot include all products, please contact with our sales engineers for more information.

More Information

SIEHE Industry------expert on manufacturing and sales of liquid and powder equipment!

QQ: 2880860650

Skype: Polinder800

Tel:021-52913185-114

Phone: +86-18916519796