Product Details

6V 4.5AH rechargeable battey for replacement in dubai

Main Features

1.Low selfdischarge: lower than 3% of rated capacity per month under normal operating temperature

2.ABS case (can be made with flame retardant V0)

3.No memory effect after repetitious usage or discharges

4.Maintenance-free operation

5.Sealed construction and leak proof

6.Safety valve regulated system

7.Operating in any position

8.Deep discharge recovery

9.Wide operating temperature range

Applications:

1.Power transmission and transformer station, switch control

2.Fire fighting, safety device and alarm monitoring

3.Aviation, spaceflight and power storage

4.Automatic office system

5.Radio communication system

6.Emergency lighting and car and ship starting system

7.Portable electric appliances and mining system

Our advantages :

1.Competitive prices with reliable quality.

2.Adopting high quality PP plastic for battery case, stronger and heatproof.

3.Plates made of high purity lead 99.994-99.996% dry charged battery

4.High quality AGM separator, pure acid

Specifications:

Nominal Voltage		6V
Rated capacity(20 hour rate)		4.5AH
Dimensions	Length	70±1mm(2.76inches)
	Width	48±1mm(1.89inches)
	Height	101±1mm(3.98inches)
	Total Hight	107±1mm(4.21inches)
Weight Approx		0.64Kg(1.42lbs)

Capacity 25°C(77°F)		20 hour rate(0.20A, 5.25V)	4.50AH
		10 hour rate(0.37A, 5.25V)	4.10AH
		5 hour rate(0.68A, 5.25V)	3.85AH
		1 hour rate(2.40A, 4.80V)	2.70AH
Internal Resistance		Full charged Battery at 25 °C (77°F)	25mΩ
Capacity affected by temperature (20 hour rate)		40°C(104°F)	102%
		25°C(77°F)	100%
		0°C(32°F)	85%
		-15°C(5°F)	65%
Self-Discharge at 25°C(77°F)		Capacity after 3 month storage	91%
		Capacity after 6 month storage	82%
		Capacity after 12 month storage	64%
Charge (constant voltage)	Cycle	Initial Charging Current less than 1.20A Voltage Charge 7.20~7.50V
Charge (constant voltage)	Float	Voltage 6.75~6.90V
Terminal		T1

Factory

Product Uses&Notice

Application:

1.Telephone switchboards, electric equipments, medical equipments, medical instruments and meters

2.Computers and uninterrupted power source (UPS)

3.Power transmission and transformer station, switch control and accident lighting

4.Fire fighting, safety device and alarm monitoring

5.Aviation, spaceflight and power storage

6.Automatic office system

7.Radio communication system

8.Emergency lighting and car and ship starting system

9.Portable electric appliances and mining system

10.Traffic and navigation signal lamp

Notice:

1.Don’t near the hot source and don’t under the sunshine.

2.Don’t charge in the sealed container.

3.No short circuit. It should be addition charge if you don’t use, and single charge per three months, to avoid irreversible sulfating. The battery should be changed when the battery jar broken or the electrolyte omitted, to avoid acid corrosion.

4.Don’t store in the space of acid gas. You should be careful and regular check when use the battery. To avoid the battery don’t work. You should change the battery if the capacity is not full or has been damage, especially after one year using.

5.Don’t put the battery in the fire, or it will explode. Please use cotton cloth to clean, if the battery is broken down and leak electrolyte. Please wash your skin when touch the electrolyte.

6.Don’t clean the battery by using the organic solution. (e.g. petrol)

Exhibition