Name: high quality 12V solar street light battery 100ah
Brand: Matrix
Availability: InStock

Product Details

high quality 12V solar street light battery 100ah

Discription:

Nominal Voltage		12V
Rated capacity(20 hour rate)		100AH
Dimensions	Length	407±1mm(16.02 inches)
	Width	173±1mm(6.81inches)
	Height	236±1mm(9.3inches)
	Total Height	240±1mm(9.45 inches)
Weight Approx		31.5Kg(69.3lbs)

Specifications:

Capacity 25°C		10 hour rate(10.00A, 10.80V)	100.00AH
		5 hour rate(16.00A, 10.50V)	80.00AH
		1 hour rate(60.00A, 9.60V)	60.00AH
Internal Resistance		Full charged Battery at 25 °C (77°F)	4.5mΩ
Capacity affected by temperature (20 hour rate)		40°C(104°F)	102%
		25°C(77°F)	100%
		0°C(32°F)	85%
		-15°C(5°F)	65%
Self-Discharge at 25°C(77°F)		Capacity after 3 month storage	91%
		Capacity after 6 month storage	82%
		Capacity after 12 month storage	64%
Charge (constant voltage)	Cycle	Initial Charging Currentless than 30.00A Voltage14.40-15.00 V
Charge (constant voltage)	Float	Voltage 13.50-13.80V
Terminal		T10

Product Description

General features:

1)Extremely safe and stable chemistry

2)Non-spillable construction design

3)ABS containers and covers optional

4)safty valve installation of explosion proof

5)high quality and high realiability

6)exceptional deep discharge recovery performance

7)low shelf discharge characteristics

8)flexible design for multiple installation positions

Applications:

♦Telephone switchboards, electric equipments, medical equipments, medical instruments and meters

♦Computers and uninterrupted power source (UPS)

♦ower transmission and transformer station, switch control and accident lighting

♦ Fire fighting, safety device and alarm monitoring

♦Aviation, spaceflight and power storage

♦Automatic office system

♦ Radio communication

♦ Emrgency lighting and car and ship starting system

♦Portable electric appliances and mining system

♦Traffic and navigation signal lamp

Warnings:

1)- Matrix series accumulator have acid in the case and are fully charged before
leaving factory. Do not attempt to dismantle the accumulator, if accidental skin/eye
contact is made with electrolyte, seek medical advice immediately.
2)- Do not use a new battery with an old one.
3)- Do not use the battery in sealed container.
4)- Each battery should have detailed record including the ex-factory date,
installing date and using record.
5)- Check the connection of wire in a fixed interval (once a year). If there is
any looseness should tighten the wire.
6)- Wipe the surface of the battery with soft cloth in a fixed interval (once
three months) and always keep the accumulator clean.
7)- Avoid using any kind of organic solvents for cleaning the surface of the
accumulator.