banner flag pole

--Specifications:

   1.Type: banner flag pole

   2.Material:  Staniless steel/aluminium

   3.Height: 3-30m.Other sizes can be customized.

   4.Thickness: 2.5-5mm.This  depends on the height of the flag pole.

   5.Top Diameter: 80mm, Bottom Diameter:.Can be customized.

   6.surface:hairline,polish, oxidatiion,powder coat.

   7.Halyard System: Internal .

   8.General Production Process:Shearing the stainless steel sheet and bending to forming.Then welding.Finally, polishing for the surface.

   9.Accessories: stainless steel halyard, 360 degree downwind ball, hanging pole for hanging flags, embedded parts for installation, Direction bead for holding flags, manual handling device with handle or electronic device if necessary.

  10. Application:hotels,exhibitions,sprots center,etc.

   Packing:  Yaolong Standard packing:
   a.use plastic bag as first layer first layer of packing,
   b.use bubble sheet as second layer of packing.
   c.use PE sheet as third layer as third layer of packing.
   d.use carton for accessories

   e.If the poles are ship in the LCL container,it will need the wooden case to protect them from being damaged during      shipment.

 Delivery: For the height less than 12M, it can be loaded into container directly.While for the huge sizes ,it can be shipped in sections and together with the self-aligning sleeve which requires Argon Arc welding.

Anodicoxidation Treatment

Our Office

Show Room

Welcome to contact us: