Flux Cored Welding Wire E71T-1 1.2mm*15kgs/Spool
USD $980 - $1200 /Ton
Min.Order:10 Tons
Farina (Jinan) Weldtec & Machinery Co., Ltd
Introduction: It is a kind of gas-shielded flux-cored welding wire for
low-carbon steel and 490MPa high strength steel. FRN-YT501T-1 is a kind
of titania type CO2 gas-shielded flux-cored welding wire. It has excellent
welding performance, soft and stable arc, fewer spatters, good slag
detachability and beautiful appearance of weld. Suitable for downhand
welding and horizontal welding. All-position welding. It has high welding
efficiency. The weld metal has been given toughening treatment by
microelements, so it has excellent low temperature toughness,
good crack-resistance and stable and reliable inherent quality.
Uses: Used for welding structures made of carbon steel and low-alloy
structural steel with tensile strength higher than or equal to 490MPa.
Most widely used for welding some key structures like shipbuilding,
mechanical manufacture, pressure vessels, boilers, petroleum machinery,
chemical machinery, hoisting machinery, etc.
pical Chemical Composition of weld metal (%)
C | Mn | Si | P | S | other |
0.05 | 1.35 | 0.45 | 0.012 | 0.010 |
Typical Deposited Metal Mechanical Feature(CO2 Shielding Gas) | ||||
Yield Strength ReL(Mpa) | Tensile Strength Rm(Mpa) | Elongation δ5(%) | Impact test | |
Temperature (ºC) | impact energy KV2 (J) | |||
480 | 580 | 27 | -20ºC | 128 |
Rference Current (DC+)
Wire Diameter(mm) | φ1.2 | φ1.4 | φ1.6 | |
Current Range(A) | Downhand Welding | 120~300 | 150~400 | 180~450 |
Vertical Upward Welding and Overhead Position Welding | 120~260 | 150~270 | 180~280 | |
Vertical Downward Welding and Overhead Position Welding | 200~300 | 220~300 | 250~300 | |
Horizontal Welding | 120~280 | 150~320 | 180~350 |
Packing terms
Diameter | 0.8mm | 0.9mm | 1.0mm | 1.2mm | 1.6mm |
Plastic spool 1kg D100mm | √ | √ | √ | ||
Plastic spool 5kg D200mm | √ | √ | √ | √ | |
Plastic spool 15kg D270mm | √ | √ | √ | √ | √ |