Self-lubricating bearing joints GE8C model spot - import joint bearing
A part of our products:
Material:
- Body : Chrome steel with zinc coated
- Outer ring: bronze/chrome steel
- Inner ring : carbon/chrome steel
Structure Features:
- Outer race lined with bronze liner.
- Rod body with right or left-hand female thread.
- Surface of rod body zinc plated, rod body with a lubricating hole or grease nipple.
- Can produce according to your request
Advantage:
·Wear resistant
·Low friction
·Minimum lubrication
·Dimensisions relatively small
·Easy replacement
Application:
-usually used in hydraulic cylinders, metal forming machinery.
-also used in hydraulic machinery and auto shock absorbers.
Pictures show
Drawing
Related models and specifications
| Dimensions | Angle | Dynamic | Static | Mass(kg) | Designations | |||
| d(mm) | D(mm) | B(mm) | C(mm) | a | C(kn) | C0(kn) | ||
| 4 | 12 | 5 | 3 | 16 | 2,16 | 5,4 | 0,003 | GE 4 C |
| 6 | 14 | 6 | 4 | 13 | 3,6 | 9 | 0,004 | GE 6 C |
| 8 | 16 | 8 | 5 | 15 | 5,85 | 14,6 | 0,008 | GE 8 C |
| 10 | 19 | 9 | 6 | 12 | 8,65 | 21,6 | 0,012 | GE 10 C |
| 10 | 22 | 12 | 7 | 18 | 11,4 | 28,5 | 0,020 | GEH 10 C |
| 12 | 22 | 10 | 7 | 10 | 11,4 | 28,5 | 0,017 | GE 12 C |
| 12 | 26 | 15 | 9 | 18 | 18 | 45 | 0,030 | GEH 12 C |
| 15 | 26 | 12 | 9 | 8 | 18 | 45 | 0,032 | GE 15 C |
| 15 | 30 | 16 | 10 | 16 | 22,4 | 56 | 0,050 | GEH 15 C |
| 17 | 30 | 14 | 10 | 10 | 22,4 | 56 | 0,050 | GE 17 C |
| 17 | 35 | 20 | 12 | 19 | 31,5 | 78 | 0,090 | GEH 17 C |
| 20 | 35 | 16 | 12 | 9 | 31,5 | 78 | 0,065 | GE 20 C |
| 20 | 42 | 25 | 16 | 17 | 51 | 127 | 0,16 | GEH 20 C |
| 25 | 42 | 20 | 16 | 7 | 51 | 127 | 0,12 | GE 25 C |
| 25 | 47 | 28 | 18 | 17 | 65,5 | 166 | 0,20 | GEH 25 C |
| 30 | 47 | 22 | 18 | 6 | 65,5 | 166 | 0,16 | GE 30 C |
| 35 | 55 | 25 | 20 | 6 | 80 | 200 | 0,23 | GE 35 CJ2 |
| 40 | 62 | 28 | 22 | 7 | 100 | 250 | 0,32 | GE 40 CJ2 |
| 45 | 68 | 32 | 25 | 7 | 127 | 320 | 0,46 | GE 45 CJ2 |
| 50 | 75 | 35 | 28 | 6 | 156 | 390 | 0,56 | GE 50 CJ2 |
| 60 | 90 | 44 | 36 | 6 | 245 | 610 | 1,10 | GE 60 CJ2 |
Introduction of spherical plain bearing series:
(1) GE... E model sheet, no lubrication oil every outer ring. Can bear radial load and any direction of smaller
axial load.
(2) GE... ES type single-slit invading.this, lubrication oil groove. Can bear radial load and any direction of
smaller axial load.
(3) GE... ES - 2RS type single-slit invading.this, lubrication oil groove, with seals at both. Can bear radial
load and any direction of smaller axial load.
(4) GEEW... ES - 2RS type single-slit invading.this, lubrication oil groove, with seals at both. Can bear radial
load and any direction of smaller axial load.
(5) GE... ESN type Single slit outer ring, have lubrication oil groove, outer ring have check dynamic slots.
Can bear radial load and any direction of smaller axial load. But the axial load by stop ring inherit, its axial
load capacity reduction.
(6) GE... XSN type A double-slit outer profile especially circle (), there is lubrication oil groove, outer ring
have check dynamic slots. Can bear radial load and any direction of smaller axial load. But the axial load by
stop ring inherit, its axial load capacity reduction.
(7) GE... HS type lubrication oil groove, inner ring has double half invading.this, after wearing clearance can
be adjusted. Can bear radial load and any direction of smaller axial load.
(8) GE... DE1 type Inner ring for hardened bearing steel, outer ring for bearing steel. Inner circle assembling
extrusion, lubricating oil and oil hole. Inner diameter less than 15mm bearings, no lubrication oil and oil
hole. Can bear radial load and any direction of smaller axial load.
(9) GE... DEM1 type Inner ring for hardened bearing steel, outer ring for bearing steel. Inner circle
assembling extrusion, bearing load bearing outer ring pressed, after the end ditch makes bearing axial
fixation. Can bear radial load and any direction of smaller axial load.
(10) GE... DS type Outer ring have assemble slots and lubricating slots. Limited to large size bearings. Can
bear radial load and any direction of smaller axial load (assembly slot side can not bear the axial load).
2. Angular contact joint bearings
GAC... S-type inside and outside circle were hardened bearing steel, outer ring have tanks and oil hole. Can
bear radial load and a direction (joint) axial load.
3. Thrust joint bearings
GX... S-type shaft lap and seat ring are hardening bearing steel, Seat ring have tanks and oil hole. Can bear
a direction of axial load or combined load (right now the radial load value nor larger axial load value of 0.5
times).
4. Fixed-end joint bearings
(1) SI... E type is GE... E type bearings and pole terminal assembly body. With female threaded rod ends,
materials for carbon steels, No lubrication oil groove. Can bear radial load and any direction less or equal
0.2 times radial load of the axial load.
(2) SA... E type is GE... E type bearings and pole terminal assembly body. Fixed-end out-of-band thread,
materials for carbon steels, No lubrication oil groove, can bear radial load and any direction less or equal
0.2 times radial load of the axial load.
(3) SI... ES type is GE... ES type bearings and pole terminal assembly body. With female threaded rod ends,
materials for carbon steels, Have lubrication oil groove. Can bear radial load and any direction less or equal
0.2 times radial load of the axial load.
(4) SA... ES type is GE... ES type bearings and pole terminal assembly body. Fixed-end out-of-band thread,
materials for carbon steels, Have lubrication oil groove. Can bear radial load and any direction less or equal
0.2 times radial load of the axial load.
(5) SIB... S-type with female threaded rod ends, materials for carbon steels, Inner ring for hardened bearing
steel, Have lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load
of the axial load.
(6) SAB... S-type fixed-end out-of-band thread, materials for carbon steels, Inner ring for hardened bearing steel,
It have lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load of the axial load.
(7) SQ... Type for ball head fixed-end joint bearings, fixed-end for carbon steels, Ball head for carburizing steels.
It can bear radial load and any direction of smaller axial load.
A: 30% T/T in advance .70% against copy of B/L
B.30% T/T in advance .70% against L/C at sight
C.Western union
D.Paypal
E:50% in advance,the balance should be paid after seeing the picture of total goods.
F:Offical Bank Account
Why us
1.High speed, High Precision, Low Noise, Long Service Life
2.Wide Array of Applications
3.Large Inventories
4.Small order accept
5.Competitive Prices and High Quality
6.Various Brands
7.Require little maintenance
8. OEM is supported
9. Our company insists on the "quality first, credit first" business ideas and our product specification is well-founded. We have a good reputation in the international market by our perfect service and sufficient supply.
Contact person: