Product Details

Product Description

Self-lubricating bearing joints GE8C model spot - import joint bearing

A part of our products:

Material:

- Body : Chrome steel with zinc coated

- Outer ring: bronze/chrome steel

- Inner ring : carbon/chrome steel

Structure Features:

- Outer race lined with bronze liner.

- Rod body with right or left-hand female thread.

- Surface of rod body zinc plated, rod body with a lubricating hole or grease nipple.

- Can produce according to your request

Advantage:

·Wear resistant
·Low friction
·Minimum lubrication
·Dimensisions relatively small
·Easy replacement

Application:

-usually used in hydraulic cylinders, metal forming machinery.

-also used in hydraulic machinery and auto shock absorbers.

Pictures show

Drawing

Related models and specifications

Dimensions				Angle	Dynamic	Static	Mass(kg)	Designations
d(mm)	D(mm)	B(mm)	C(mm)	a	C(kn)	C0(kn)	Mass(kg)	Designations
4	12	5	3	16	2,16	5,4	0,003	GE 4 C
6	14	6	4	13	3,6	9	0,004	GE 6 C
8	16	8	5	15	5,85	14,6	0,008	GE 8 C
10	19	9	6	12	8,65	21,6	0,012	GE 10 C
10	22	12	7	18	11,4	28,5	0,020	GEH 10 C
12	22	10	7	10	11,4	28,5	0,017	GE 12 C
12	26	15	9	18	18	45	0,030	GEH 12 C
15	26	12	9	8	18	45	0,032	GE 15 C
15	30	16	10	16	22,4	56	0,050	GEH 15 C
17	30	14	10	10	22,4	56	0,050	GE 17 C
17	35	20	12	19	31,5	78	0,090	GEH 17 C
20	35	16	12	9	31,5	78	0,065	GE 20 C
20	42	25	16	17	51	127	0,16	GEH 20 C
25	42	20	16	7	51	127	0,12	GE 25 C
25	47	28	18	17	65,5	166	0,20	GEH 25 C
30	47	22	18	6	65,5	166	0,16	GE 30 C
35	55	25	20	6	80	200	0,23	GE 35 CJ2
40	62	28	22	7	100	250	0,32	GE 40 CJ2
45	68	32	25	7	127	320	0,46	GE 45 CJ2
50	75	35	28	6	156	390	0,56	GE 50 CJ2
60	90	44	36	6	245	610	1,10	GE 60 CJ2

Introduction of spherical plain bearing series:

(1) GE... E model sheet, no lubrication oil every outer ring. Can bear radial load and any direction of smaller

axial load.

(2) GE... ES type single-slit invading.this, lubrication oil groove. Can bear radial load and any direction of

smaller axial load.

(3) GE... ES - 2RS type single-slit invading.this, lubrication oil groove, with seals at both. Can bear radial

load and any direction of smaller axial load.

(4) GEEW... ES - 2RS type single-slit invading.this, lubrication oil groove, with seals at both. Can bear radial

load and any direction of smaller axial load.

(5) GE... ESN type Single slit outer ring, have lubrication oil groove, outer ring have check dynamic slots.

Can bear radial load and any direction of smaller axial load. But the axial load by stop ring inherit, its axial

load capacity reduction.

(6) GE... XSN type A double-slit outer profile especially circle (), there is lubrication oil groove, outer ring

have check dynamic slots. Can bear radial load and any direction of smaller axial load. But the axial load by

stop ring inherit, its axial load capacity reduction.

(7) GE... HS type lubrication oil groove, inner ring has double half invading.this, after wearing clearance can

be adjusted. Can bear radial load and any direction of smaller axial load.

(8) GE... DE1 type Inner ring for hardened bearing steel, outer ring for bearing steel. Inner circle assembling

extrusion, lubricating oil and oil hole. Inner diameter less than 15mm bearings, no lubrication oil and oil

hole. Can bear radial load and any direction of smaller axial load.

(9) GE... DEM1 type Inner ring for hardened bearing steel, outer ring for bearing steel. Inner circle

assembling extrusion, bearing load bearing outer ring pressed, after the end ditch makes bearing axial

fixation. Can bear radial load and any direction of smaller axial load.

(10) GE... DS type Outer ring have assemble slots and lubricating slots. Limited to large size bearings. Can

bear radial load and any direction of smaller axial load (assembly slot side can not bear the axial load).

2. Angular contact joint bearings

GAC... S-type inside and outside circle were hardened bearing steel, outer ring have tanks and oil hole. Can

bear radial load and a direction (joint) axial load.

3. Thrust joint bearings

GX... S-type shaft lap and seat ring are hardening bearing steel, Seat ring have tanks and oil hole. Can bear

a direction of axial load or combined load (right now the radial load value nor larger axial load value of 0.5

times).

4. Fixed-end joint bearings

(1) SI... E type is GE... E type bearings and pole terminal assembly body. With female threaded rod ends,

materials for carbon steels, No lubrication oil groove. Can bear radial load and any direction less or equal

0.2 times radial load of the axial load.

(2) SA... E type is GE... E type bearings and pole terminal assembly body. Fixed-end out-of-band thread,

materials for carbon steels, No lubrication oil groove, can bear radial load and any direction less or equal

0.2 times radial load of the axial load.

(3) SI... ES type is GE... ES type bearings and pole terminal assembly body. With female threaded rod ends,

materials for carbon steels, Have lubrication oil groove. Can bear radial load and any direction less or equal

0.2 times radial load of the axial load.

(4) SA... ES type is GE... ES type bearings and pole terminal assembly body. Fixed-end out-of-band thread,

materials for carbon steels, Have lubrication oil groove. Can bear radial load and any direction less or equal

0.2 times radial load of the axial load.

(5) SIB... S-type with female threaded rod ends, materials for carbon steels, Inner ring for hardened bearing

steel, Have lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load

of the axial load.

(6) SAB... S-type fixed-end out-of-band thread, materials for carbon steels, Inner ring for hardened bearing steel,

It have lubrication oil groove. Can bear radial load and any direction less or equal 0.2 times radial load of the axial load.

(7) SQ... Type for ball head fixed-end joint bearings, fixed-end for carbon steels, Ball head for carburizing steels.

It can bear radial load and any direction of smaller axial load.