900 single band cellular repeater 40dBm 10Walt
Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.
900 single band cellular repeater 40dBm 10Walt Functions
The GSM Signal Repeater works at the mode of full duplexer. Not only amplifying the BTS weak signals then sending them to the mobile phone,but also extending the mobile phone signals then transmitting them to BTS.
900 single band cellular repeater 40dBm 10Walt Main Features
1) Modular design enables easy upgrade to additional bands at a relatively low cost;
2) Advanced technology,flexibility and proved reliability;
3)Lower acquisition costs and operational costs;
4)Easy to install and small footprint with no need for expensive transmission lines,special cabinets.
900 single band cellular repeater 40dBm 10Walt Typical Application
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Outdoor:Airports,Tourism Regions,Golf Courses,Tunnels,Factories,Mining Districts,Village etc.
Indoor:Hotels,Exhibition Centers,Basements,Shopping Malls,Offices,Packing Lots etc.
900 single band cellular repeater 40dBm 10Walt Technical Specifications
GSM850MHz: Uplink: 824.00~849.00MHz, Downlink: 869.00~894.00MHz;
GSM900MHz: Uplink: 890.00~915.00MHz, Downlink: 935.00~960.00MHz;
GSM1800MHz: Uplink:1710.00~1785.00MHz, Downlink: 1805.00~1880.00MHz;
Output Power: 33dBm,37dBm,40dBm,43dBm (Customized)
Gain: 95dB
Items | GSM900MHz Band Selective Repeater | ||
Frequency Range | Uplink | 890-915MHz | |
Downlink | 935-960MHz | ||
Output Power | Uplink | 33dBm | |
Downlink | 40dBm | ||
Working Bandwidth | Various bandwidth is available upon request | ||
Gain | Min. 90dB | ||
AGC Control Range | Min 40dB (+/-2dB) | ||
Gain Control Range | 31dB (1dB Step) | ||
VSWR | < 1.5 | ||
Ripple in Band | Max +/-1.5dB | ||
Inter modulation attenuation | ≤-45dBc ; ≤-36dBc | ||
Spurious Emissions | 9KHz-1GHz | Max -36dBm | |
1GHz-12.75GHz | Max -30dBm | ||
RF Connector | N-type Female | ||
I/O Impedance | 50 ohm | ||
Noise Figure | Max 5dB | ||
Group Time Delay | Max 5µS | ||
Temperature Range | -25 degree Celsius to +55 degree Celsius | ||
Relative Humidity | Max 95% | ||
MTBF | Min. 100,000 hrs | ||
Power Supply | DC -48V / AC220V/110V (+/-15%), 50Hz/60Hz | ||
NMS Monitor Function(Optional) | Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power, Gain, Uplink ATT, Downlink ATT and etc. | ||
Remote Control Module(Optional) | RS232 + Wireless Modem + Chargeable Li-ion Battery | ||
In-Building Coverage Solution :
Outdoor Coverage Solution:
Frequency range list for our repeaters :
Support System | Frequency Range | Output Power |
GSM900MHZ | 890-915MHz/935-960MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
DCS1800MHz | 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
PCS1900MHz | 1895-1910MHz/1975-1990MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA450MHz | 450-457.5MHz/460-467.5MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA800MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA1900MHz | 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS2100MHz | 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM900/1800MHZ | 890-915MHz/935-960MHz 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/ |
GSM850/1900MHZ | 824-849MHz/869-894MHz 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W |
GSM900/UMTS2100 | 890-915MHz/935-960MHz 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/ |
Our repeater support above frequency range .
Our present manufacturing service:
1. Single-band repeaters of LTE/GSM/CDMA/PCS/DCS/WCDMA
2. Dual-band repeater of GSM/DCS; GSM/WCDMA; CDMA/PCS;
3. Tri-band repeater of GSM/DCS/WCDMA
4,Trunk Amplifier
5. All kind of Antenna/Splitter/Connector/Cable
Question: I work in an office building where my cell phone coverage in certain areas, including my office, is non-existent or spotty at best. How can I improve my coverage?
Answer: The requirement for reliable, always-on cell phone coverage within the office environment is increasing dramatically. It is not unusual to encounter trouble spots within a building where cell phone signals are weak or non-existent.
Kingtone repeater provides affordable and clear coverage to those trouble spots. The unit can be easily deployed and provides a coverage range of up to 100,000 square feet. Multiple units can be easily deployed to cover office areas and working locations.
Kingtone repeater can be deployed even without access to the roof or outside.
GSM 900 single band repeater 40dBm 10Walt
GSM 900 single band repeater 40dBm 10Walt
GSM 900 single band repeater 40dBm 10Walt
GSM 900 single band repeater 40dBm 10Walt
GSM 900 single band repeater 40dBm 10Walt
GSM 900 single band repeater 40dBm 10Walt
GSM Signal Repeater 850MHz,900MHz,1800MHz
GSM rf Wireless Signal Repeater 800MHz/850MHz/900MHz/1800MHz Repeater out power: 33dBm~43dBm
Welcome to OEM ,For more information: www.kingtonecc
Welcome to OEM From China ,For more information:
Frequency list of Kingtone Repeaters:
Support System | Frequency Range | Output Power |
GSM900MHZ | 890-915MHz/935-960MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
DCS1800MHz | 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
PCS1900MHz | 1895-1910MHz/1975-1990MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA450MHz | 450-457.5MHz/460-467.5MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA800MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
CDMA1900MHz | 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS850MHz | 824-849MHz/869-894MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
UMTS2100MHz | 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/30W/40W/50W/60W |
GSM900/1800MHZ | 890-915MHz/935-960MHz 1710-1785MHz/1805-1880MHz | 2W/5W/10W/20W/ |
GSM850/1900MHZ | 824-849MHz/869-894MHz 1880-1890MHz/1960-1970MHz | 2W/5W/10W/20W |
GSM900/UMTS2100 | 890-915MHz/935-960MHz 1920-1980MHz/2110-2170MHz | 2W/5W/10W/20W/ |
Question: When I'm at the cottage, I'd like to stay in touch, but if I publish my cottage number, everyone will call. I'd like to just use my cell phone. Can you help?
Answer: Signals in many cottage areas are marginal and cannot penetrate the walls of your cottage. Kingtone repeater can be easily deployed to provide coverage throughout your cottage. In a cottage, the donor unit is generally deployed outside – for example, under the eaves or on a utility pole. Because it is more sensitive than your phone and is mounted higher up, it can usually detect signals that your phone can't. The coverage range of 15,000 to 50,000 square feet (2,000 to 4,600 square metres) is adequate for most cottages.
You get the privacy of your cottage and the convenience of your cell phone. Just remember to turn it off sometimes!
Question: I'm a production manager in a factory, and no cell phones work inside. I spend most of my time in a couple of spots. Can you help?
Answer: Factories and warehouses with lots of metal construction often have poor signals. While these buildings may be large, the employees are generally located in only a few areas.
Kingtone repeater can be easily deployed to provide coverage in those spots. The donor unit is deployed on the roof and connected to a coverage unit inside. The coverage range of up to 100,000 square feet is adequate for most trouble spots. Multiple units can be easily deployed to cover office areas and other working locations
Cary Cao |
Quanzhou Kingtone Optics & Electronics Technology Co., Ltd Add:3th Floor,Bld B,Yucheng Base, Keji Road,Fengze district ,Quanzhou ,Fujian,China. |
Tell: 86 595 23897999 Fax: 86 595 22155502 Mobile:86 13506927982 skype: cary.cao4 Web: |