Name: dcs 1800 2W 33dBm gsm1800 repeater1800 Cell Phone signal Repeater
Brand: Kingtone
Availability: InStock

Product Details

Product Description

GSM1800MHz Outdoor Wireless Cell Phone signal Repeater 2W 33dBm~46dBm

Kingtone Repeaters system is designed to solve problems of weak mobile signal, which is much cheaper than adding a new Base Station (BTS). Main operation of RF Repeaters system is to receive low power signal from BTS via radio frequency transmission and then transmit the amplified signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and transmitted to the BTS via the opposite direction.

Main Features of kingtone gsm 1800 mobile cellular repeater

High linearity PA; High system gain;

Intelligent ALC technology;

Full duplex and high isolation from uplink to downlink;

Automatic Operation convenient operation;

Integrated technique with reliable performance;

Local and remote monitoring (optional) with automatic fault alarm &remote control;

Weatherproof design for all weather installation;

1800 Cell Phone signal Repeater Specifications

Outdoor Wireless Cell Phone GSM Repeater :
1.850MHz,900MHz,1800MHz;
2,33dBm,37dBm,40dBm,43dBm;
3,Wireless Outdoor Repeater;

1800 Cell Phone signal Repeater Features:

Kingtone Outdoor Wireless Cell Phone GSM Repeater:

1,It is a high power repeater for GSM applications;

2,It can be applied as an outdoor solution;

3,The GSM Repeater is a cost-effective repeater that will reduce the overall cost of signal coverage extension without the need of implementing more BTS sites;

4,LED light working & signal condition indicators;

1800 Cell Phone signal Repeater
Typical Applications:

Kingtone Outdoor Wireless Cell Phone GSM Repeater are widely used in the places below:

Railway Tube Scenery spot

Campus Hospital Oil field

Road Sea-route Town

Rural area Airport Venue

GSM1800MHz Outdoor Wireless Cell Phone signal Repeater

Technical Specifications:

Items		Testing Condition	Specification
			Uplink	Downlink
Working Frequency(MHz)		Nominal Frequency	1710-1785MHz	1805-1880MHz
Gain(dB)		Nominal Output Power-5dB	90±3
Output Power (dBm)		GSM modulating signal	33	33
ALC (dBm)		Input Signal add 20dB	Po≤±1
Noise Figure (dB)		Working in-band(Max. Gain)	≤5
Ripple in-band (dB)		Nominal Output Power -5dB	≤3
Frequency Tolerance (ppm)		Nominal Output Power	≤0.05
Time Delay (us)		Working in-band	≤5
Peak Phase Error(°)		Working in-band	≤20
RMS Phase Error (°)		Working in-band	≤5
Gain Adjustment Step (dB)		Nominal Output Power -5dB	1dB
Gain Adjustment Range(dB)		Nominal Output Power -5dB	≥30
Gain Adjustable Linear(dB)	10dB	Nominal Output Power -5dB	±1.0
	20dB	Nominal Output Power -5dB	±1.0
	30dB	Nominal Output Power -5dB	±1.5
Inter-modulation Attenuation (dBc)		Working in-band	≤-45
Spurious Emission(dBm)	9kHz-1GHz	BW:30KHz	≤-36	≤-36
	1GHz-12.75GHz	BW:30KHz	≤-30	≤-30
VSWR		BS/MS Port	1.5
I/O Port		N-Female
Impedance		50ohm
Operating Temperature		-25°C ~+55°C
Relative Humidity		Max. 95%
MTBF		Min. 100000 hours
Power Supply		DC-48V/AC220V(50Hz)/AC110V(60Hz)( ±15%)
Remote Monitoring Function		Real-time alarm for Door Status, Temperature, Power Supply, VSWR, Output Power
Remote Control Module		RS232 or RJ45 + Wireless Modem + Chargeable Li-ion Battery

Product Overviews