Specifications
Servo system,save electricity 60% ,Reduce cycle time ,High precision & repeatability,it could make all kinds of plastic products
INJECTION UNIT |
| Unit | LSF-148S | ||
A | B | C | |||
Screw Diameter | Mm | 38 | 42 | 45 | |
Screw L/D Ratio | L/D | 23.6 | 21.4 | 20 | |
Short Size | Cm3 | 221 | 270 | 310 | |
Injection weight | G | 201 | 246 | 282 | |
Injection Rate | g/s | 105 | 132 | 151 | |
Plasticizing capacity | g/s | 16 | 20 | 24 | |
Injection Pressure | Mpa | 235 | 190 | 167 | |
Screw Speed | Rpm | 0-200 | |||
CLAMPING UNIT | Clamp Force | KN | 1480 | ||
Space Between Tie Bars | mm | 410*410 | |||
Toggle Stroke | mm | 380 | |||
Max. Mold Height | mm | 460 | |||
Min. Mold Height | mm | 150 | |||
Ejector Stroke | mm | 130 | |||
Ejector Tonnage | KN | 39.6 | |||
Ejector Number | P | 5 | |||
OTHERS | Max. pump Pressure | Mpa | 16 | ||
Pump motor powder | Kw | 13 | |||
Heater Power | Kw | 7.6 | |||
Machine Dimension(L*W*H) | M | 4.5*1.35*1.85 | |||
Machine Weight | T | 4.2 | |||
