PET preform injection machine
USD $31,000 - $31,000 /Set
Min.Order:1 Set
Changzhou Longsheng Machinery Co., Ltd.
INJECTION UNIT |
| Unit | LSF-208 | ||
A | B | C | |||
Screw Diameter | Mm | 45 | 50 | 55 | |
Screw L/D Ratio | L/D | 22.2 | 20 | 18.2 | |
Short Size | Cm3 | 381 | 471 | 569 | |
Injection weight | G | 347 | 428 | 518 | |
oz | 12.2 | 15.1 | 18.2 | ||
Injection Rate | g/s | 170 | 210 | 254 | |
Plasticizing capacity | g/s | 19 | 23.2 | 28.7 | |
Injection Pressure | Mpa | 229 | 186 | 154 | |
Screw Speed | Rpm | 0-190 | |||
Injection Sroke | mm | 240 | |||
CLAMPING UNIT | Clamp Force | KN | 2080 | ||
Space Between Tie Bars | mm | 510*510 | |||
Toggle Stroke | mm | 500 | |||
Max. Mold Height | mm | 530 | |||
Min. Mold Height | mm | 200 | |||
Ejector Stroke | mm | 150 | |||
Ejector Tonnage | KN | 62 | |||
Ejector Number | P | 5 | |||
OTHERS | Max. pump Pressure | Mpa | 16 | ||
Pump motor powder | Kw | 18.5 | |||
Heater Power | Kw | 14.25 | |||
Machine Dimension(L*W*H) | M | 5.3*1.4*1.95 | |||
Machine Weight | T | 6.9 | |||
Oil Tank Capacity | L | 380 | |||
Hopper Volume | Kg | 50 |
Application and Features: 2. Low-speed high torque hydraulic motors drive screws directly, stepless speed changing is achieved. 3. Adopting five-pivot point double-elbow hydraulic machinery clamping devices, for energy saving and stable movement. 4. Adopting computer control, proportional electro-hydraulic drive, fail safe, high degree of automation. 5. The machine has an electrical safety duplicate protection device, which is safe and reliable to be operated. 6. Hydraulic components are designed to be outside the machine, which is easy for installation and maintenance. |