Specifications
Servo system,save electricity 60% ,Reduce cycle time ,High precision & repeatability,it could make all kinds of plastic products
INJECTION UNIT |
| Unit | LSF-258 | ||
A | B | C | |||
Screw Diameter | Mm | 50 | 55 | 60 | |
Screw L/D Ratio | L/D | 24 | 21.8 | 20 | |
Short Size | Cm3 | 504 | 610 | 726 | |
Injection weight | G | 459 | 555 | 661 | |
Injection Rate | g/s | 32 | 146 | 174 | |
Injection Pressure | Mpa | 223 | 184 | 155 | |
Screw Speed | Rpm | 0-190 | |||
CLAMPING UNIT | Clamp Force | KN | 2580 | ||
Space Between Tie Bars | mm | 560X530 | |||
Toggle Stroke | mm | 505 | |||
Max. Mold Height | mm | 560 | |||
Min. Mold Height | mm | 200 | |||
Ejector Stroke | mm | 150 | |||
Ejector Tonnage | KN | 62 | |||
Ejector Number | P | 9 | |||
OTHERS | Max. pump Pressure | Mpa | 16 | ||
Pump motor powder | Kw | 22 | |||
Heater Power | Kw | 16 | |||
Machine Dimension(L*W*H) | M | 5.5X1.6X2.1 | |||
Machine Weight | T | 7.1 | |||
Oil Tank Capacity | L | 420 | |||
