Glass fiber reinforced plastic pipes are also known as glass fiber wound sand pipes (RPM pipes). It mainly uses glass fiber and its products as reinforcing materials, polymer-based unsaturated polyester resins, epoxy resins, etc. as basic materials, and inorganic non-metal particulate materials such as quartz sand and calcium carbonate as fillers as main raw materials. The standard effective lengths of the tube are 6m and 12m. There are three methods for making the tube: fixed-length winding process, centrifugal casting process and continuous winding process. Can be classified according to the product's process method, pressure level PN and stiffness level SN.
Advantages of FRP pipes are as follows:
1. Good corrosion resistance. As the main raw material of FRP is composed of unsaturated polyester resin and glass fiber with high polymer content, it can effectively resist the corrosion of acid, alkali, salt and other media and untreated domestic sewage, corrosive soil, chemical wastewater and many chemical liquid Erosion, under normal circumstances, can maintain the safe operation of the pipeline for a long time.
2. Good aging resistance and heat resistance. FRP can be used for a long time in the temperature range of -40 ° C to 70 ° C. The specially formulated high temperature resistant resin can also work normally at temperatures above 200 ° C. For long-term use in open-air pipes, ultraviolet absorbers are added to the outer surface of the pipes to eliminate the radiation of ultraviolet rays to the pipes and delay the aging of FRP pipes.
3. Good frost resistance. Below minus 20 ° C, freeze cracking will not occur after freezing inside the tube.
4. Light weight, high strength and convenient transportation. FRP pipe is not only light in weight, high in strength, strong in plasticity, easy to transport and install, but also easy to install various branch pipes, and the installation technology is simple.
5. Good hydraulic conditions. The inner wall is smooth, the transportation capacity is strong, no scaling, no rust, and small water resistance.
Specifications of FRP Pipe
Diameter: DN15-4000mm
Pressure grade: 0.1MPa, 0.6MPa, 1.0MPa, 1.6MPa, 2.0MPa, 2.5MPa Stiffness grade: SN1250, SN2500, SN5000, SN10000
Related Products
Application of FRP pipe
1. Chemical medium conveying pipe
2. Various craft halls (chemical process, papermaking process, sewage treatment process, seawater desalination process, food and beverage processing process, pharmaceutical process, etc.)
3. Pressure water pipes of small hydropower stations on the ground, circulating water pipes of power plants
4. Sewage collection and transmission pipeline
5. Drinking water mains and distribution pipes
6. Oilfield water injection pipe and crude oil delivery pipe
7. Thermal energy pipeline, seawater pipeline
8. Agricultural machinery irrigation pipe
9. Vacuum tube, external pressure tube and siphon tube
Production line
Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers.
Major products:
FRP vessel and chemical
equipment in sets;
FRP high, medium & low pressure pipe
FRP septic tank
FRP molded & pultrused products
Electrolytic cell S/F, F/F oli storage tank
Whole set of FRP prodcution machines
Hengshui Aoliande Trade Co.,Ltd. not only have ability to sell & supply products, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation,installation supervision etc service.
Main application:
Urban water supply and drainage
Desalination of sea water
Chemical industry
Metallurygy Brewing
Electric power
Oil storing
Sewage treatment
Building Municipal works
Highway facilities
Our certification
Q: Are you a commercial company or manufacturer?
A: We are a company with commercial company and factory together. Our trading company is called Hengshui Aoliande Trading Co., Ltd and the factory is called Hengshui Jiubo Composites Co., Ltd.
Q: I didn't see the dimension information or find the size I need, can you do it according to my requirements?
A: For FRP products, all dimensions can be customized. We can do it at the customer's request.
Q: How long is the delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the products are not in stock, it is according to the quantity.
Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free, but not pay the freight cost.
Q: What are your payment terms?
A: Payment <= 1000USD, 100% in advance. Payment> = 1000USD, 30% T / T in advance, balance before shipment.
If you have another question, please send us your question directly.