Characteristics of FRP pipes
1. Light weight and high strength: the proportion of glass fibre reinforced plastic sand pipe is 1.65~ 2. For the unit length weight of the same diameter, only 1/3 of carbon steel, 1/5 of FRP pipe and 1/10 of pre-stressed concrete pipe reduce the hoisting cost and increase the installation speed.
2. Good hydraulic characteristics:
Can save pipe pumping costs.
Reduction of pipe diameter
Shortening pumping time.
FRP pipes do not foul for long term and do not need to clean up, so that the water quality is not polluted by two times.
3. Good water and corrosion resistance:
FRP sandwich pipeline has excellent corrosion resistance, which reduces the cost of anti-corrosion and prolongs the service life; at the same time, because of non-rusting, the water quality of water conveyance is not subjected to secondary pollution. It can also be used to transport sewage, mud, sea water and other media.
4. Pressure withstanding:
Design and manufacture pipes and fittings according to the pressure required by the process, and conduct hydraulic test at 1.5 times the pressure required by the process.
5.The interface has good sealing performance, no leakage, no rupture, and increased water supply safety and reliability.
6. Non toxic, can be used for conveying drinking water.

 

Application of FRP pipes
Drinking water conveyance trunk pipe and water distribution pipe.
Sewage pipes and rainwater pipes.
Agricultural irrigation pipe.

 

Features of FRP Pipe
1. Excellent physics mechanics characteristics
The density of the FRP tube material is 1.8-2.1g/cm3.It is about 25 percent of the steel. The density is higher than rolled steel , cast iron and plastic. The weight of the FRP tube is not more than 33 percent of the same specification steel tube, The physics mechanics characteristics. The FRP tube's heat expanding modulus is almost the same as the steel. The heat exchange modulus is 0.5% of the steel. It is a good insulation material of heat and electricity.

2. Anti chemistry eroding, The using lifespan is longer

The FRP tube has the special characteristic of anti chemistry eroding, under the star studded condition of the tube. It depends on the request of the medium to choose the different anti eroding tube. As for the vertical burying FRP filling voile tube the lifespan must be more than 40 years.

3. Hydraulics characteristics
Excellent Hydraulics characteristics mean that a smaller pipe diameter or a smaller power delivery pump can be selected, so as to reduce the initial investment of pipeline engineering, save electricity and reduce operating costs.

4. Low fee of installing and maintenance
The FRP tube doesn't need special antisepticise disposal, heat preservation can reduce thinness, the pipeline is light, little suspending equipment tonnage, consume little power, long single FRP pipeline, few tie-in on the scene, so the construction is convenient.

5. Unpolluted medium
The FRP pipeline's density is higher, no impurity peel off and shed, no cauterization, without microorganism and bacteria, so it will not bring any pollution to the transporting material.

 

Fittings

Hengshui Aoliande Trade Co., Ltd. is professional company which to market & sell FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service, passed ISO9001, ISO14001, OHSAS18001 management system certification, now we have 50+ staff, annual sales of glass fiber reinforced plastic series products achieved 5,000,000 USD, products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia, Egypt etc, and won the support and trust from new & old customers.

Major products:

FRP vessel and chemical

equipment in sets;

FRP high, medium & low pressure pipe

FRP septic tank

FRP molded & pultrused products

Electrolytic cell S/F, F/F oli storage tank

Whole set of FRP prodcution machines

Hengshui Aoliande Trade Co.,Ltd. not only have ability to sell & supply products, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation,installation supervision etc service.

Main application:

Urban water supply and drainage

Desalination of sea water

Chemical industry

Metallurygy Brewing

Electric power

Oil storing

Sewage treatment

Building Municipal works

Highway facilities

 

Our customers and certificates

 

Q: Are you a commercial company or manufacturer?
A: We are a company with commercial company and factory together. Our trading company is called Hengshui Aoliande Trading Co., Ltd and the factory is called Hengshui Jiubo Composites Co., Ltd.

Q: I didn't see the dimension information or find the size I need, can you do it according to my requirements?
A: For FRP products, all dimensions can be customized. We can do it at the customer's request.

Q: How long is the delivery time?
A: Generally it is 5-10 days if the goods are in stock. Or it is 15-20 days if the products are not in stock, it is according to the quantity.

Q: Do you provide samples? Is it free or extra?
A: Yes, we could offer the sample for free, but not pay the freight cost.

Q: What are your payment terms?
A: Payment <= 1000USD, 100% in advance. Payment> = 1000USD, 30% T / T in advance, balance before shipment.
If you have another question, please send us your question directly.