Product Information
FRP/GRP Fiberglass Pipe DN1200 DN2400 DN4000
FRP pipe introduction:
FRP/GRP mortar pipe is composed of inner layer,wound layer,resin-mortar layer and external corrosion resist layer, it's density is 1.7-2.1, equals to 1/5 of steel pipe, 1/4 of ductile iron pipe, it has excellent properties-corrosion resist,good hydraulic property,shock-resist,easily installation etc.
Diameter:DN15-DN4000mm
Pressure:gravity,0.6MPa,1.0MPa,1.6MPa,2.0MPa,2.5MPa
Stiffness:SN2500,SN5000,SN7500,SN10000
Connections:spigot & socket joint with double O rings,Butt & strap joint,flanged joint etc.
FRP pipe introduction:
FRP/GRP mortar pipe is composed of inner layer,wound layer,resin-mortar layer and external corrosion resist layer, it's density is 1.7-2.1, equals to 1/5 of steel pipe, 1/4 of ductile iron pipe, it has excellent properties-corrosion resist,good hydraulic property,shock-resist,easily installation etc.
Diameter:DN15-DN4000mm
Pressure:gravity,0.6MPa,1.0MPa,1.6MPa,2.0MPa,2.5MPa
Stiffness:SN2500,SN5000,SN7500,SN10000
Connections:spigot & socket joint with double O rings,Butt & strap joint,flanged joint etc.
Product name | FRP Pipe |
Material | Fiberglass Reinforced Plastic |
Size | Customised Size |
Advantage | Ligher Weight and High Pressure |
Fiberglass reinforced ring GRP Pipes/ FRP pipe Specifications:
1.Diameter: DN50-DN5000 (mm)
2.Pressure rating: 0.1MPa, 0.25MPa, 0.4MPa, 0.6MPa, 0.8MPa, 1.0MPa, 1.2MPa, 1.4MPa, 1.6MPa, 2.0MPa, 2.5MPa
3.Hardness level: SN1250, SN2500, SN5000, SN10000,SN20000 (N / m²)
4.standard length: 6m, 12m
5.Connection way:bell and spigot ,bonded ,flange ,hand lay-up
1.Diameter: DN50-DN5000 (mm)
2.Pressure rating: 0.1MPa, 0.25MPa, 0.4MPa, 0.6MPa, 0.8MPa, 1.0MPa, 1.2MPa, 1.4MPa, 1.6MPa, 2.0MPa, 2.5MPa
3.Hardness level: SN1250, SN2500, SN5000, SN10000,SN20000 (N / m²)
4.standard length: 6m, 12m
5.Connection way:bell and spigot ,bonded ,flange ,hand lay-up
Fiberglass reinforced ring GRP Pipes/ FRP pipe Executive Standard:
1.JC/T552-2011 "winding filament reinforced thermosetting resin pressure pipe"
2.GB / T21238-2007 "Glass fiber reinforced plastics mortar pipes"
3.DL / T802-2007 "glass fiber reinforced plastic cable duct" AWWA M45-2005 "Fiberglass pipe design manual" ANSI / AWWA C950 "Fiberglass pressure pipe"
4.GB50332-2002"Water and sewer pipe structure design specifications"
5.ASTM D2996 "Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe"
6.ASTM D3262 "Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
7.ASTM D3517 "Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
8.ASTM D3754 "Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
9.DIN16868 "Glass fiber reinforced unsaturated polyester resin (UP-GF) pipes"
10.BS5480 "Specification for Fiberglass (GRP) pipes, joints and fittings for use water supply or sewerage"
11.BS7159 "Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites"
12.ISO10639 "Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin"
13.ISO14692 "Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping"
1.JC/T552-2011 "winding filament reinforced thermosetting resin pressure pipe"
2.GB / T21238-2007 "Glass fiber reinforced plastics mortar pipes"
3.DL / T802-2007 "glass fiber reinforced plastic cable duct" AWWA M45-2005 "Fiberglass pipe design manual" ANSI / AWWA C950 "Fiberglass pressure pipe"
4.GB50332-2002"Water and sewer pipe structure design specifications"
5.ASTM D2996 "Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe"
6.ASTM D3262 "Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe"
7.ASTM D3517 "Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe"
8.ASTM D3754 "Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe"
9.DIN16868 "Glass fiber reinforced unsaturated polyester resin (UP-GF) pipes"
10.BS5480 "Specification for Fiberglass (GRP) pipes, joints and fittings for use water supply or sewerage"
11.BS7159 "Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites"
12.ISO10639 "Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin"
13.ISO14692 "Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping"
Fiberglass reinforced ring GRP Pipes/ FRP pipe character:
Durable and corrosion resistant , is 4-5 times of steel pipe.
Do not produce rust and alga-suitable for portable water
light weight, high strength, easy installation.(1/4 weight of steel)
Require no internal and external coating.
High flow efficient,allow downsize.
Have design life of 30-50 years
No maintaince cost.
low internal frication,low operation(pumping) cost.
Suitable for high pressure
Show contant hydraulic character over time
Freezing tolerance.It can be longly used in -40-100 °C.
Have easy and reliable jointing way
Are suitable for underground and aboveground application.
Durable and corrosion resistant , is 4-5 times of steel pipe.
Do not produce rust and alga-suitable for portable water
light weight, high strength, easy installation.(1/4 weight of steel)
Require no internal and external coating.
High flow efficient,allow downsize.
Have design life of 30-50 years
No maintaince cost.
low internal frication,low operation(pumping) cost.
Suitable for high pressure
Show contant hydraulic character over time
Freezing tolerance.It can be longly used in -40-100 °C.
Have easy and reliable jointing way
Are suitable for underground and aboveground application.
Fiberglass reinforced ring GRP Pipes/ FRP pipe Application:
Desalination
water treadment
water distribution networks
chemical process plant and power plant
petrochemical, metallurgy and mining
firewater
hot and cold water
Drinking water
Wastewater/Sewage,Municipal water
Irrigation
Circulating water
Ship and marine engineering
Desalination
water treadment
water distribution networks
chemical process plant and power plant
petrochemical, metallurgy and mining
firewater
hot and cold water
Drinking water
Wastewater/Sewage,Municipal water
Irrigation
Circulating water
Ship and marine engineering
Details Images
Related Products
Our company
Our company
Hengshui Aoliande trading Co., Ltd is a professional sales of FRP pipe, FRP tanks, FRP pultrusion profiles, FRP molded products and complete sets of glass fiber reinforced plastic production equipment professional company, through the professional and technical development and the introduction, the company relies on advanced technology, exquisite craft, reliable quality and perfect service, and passed the ISO9001, ISO14001, OHSAS18001 management system certification, the company existing staff more than 50 people, annual sales of glass fiber reinforced plastic series of products 6000 tons, the products have been sold to all over the world,and other countries have won the support and trust of new and old customers.
Packing and Shipping
Certifications
FAQ
1. Q: Are you Trading Company or Manufacturing Factory?
A: We are both manufacturer and trading company. We have our own factory for almost seven years, and we have better service of overseas customers. Welcome to send your inquiry!
2. Q: How about the Delivery time?
A: 60days after receiving the deposit based on the MOQ. Normally, 30-35days to finish the order for a 20ft container. Welcome to ask for the detailed delivery time according to your order quantity!
3. Q: How can you guarantee the product quality?
A: We have the quality control system ISO9001:2008, and it's been followed strictly. We also have the professional QC team, and each our package worker will be in charge of the final inspection according to the QC instruction beforepacking.
4. Q: What is about the payment terms.
A: Basically, the payment terms are T/T, L/C at sight. Alipay.
5. Q: Can you do OEM for me?
A: We accept all OEM orders,just contact us and give me your design,we will offer you a reasonable price ASAP.
A: We are both manufacturer and trading company. We have our own factory for almost seven years, and we have better service of overseas customers. Welcome to send your inquiry!
2. Q: How about the Delivery time?
A: 60days after receiving the deposit based on the MOQ. Normally, 30-35days to finish the order for a 20ft container. Welcome to ask for the detailed delivery time according to your order quantity!
3. Q: How can you guarantee the product quality?
A: We have the quality control system ISO9001:2008, and it's been followed strictly. We also have the professional QC team, and each our package worker will be in charge of the final inspection according to the QC instruction beforepacking.
4. Q: What is about the payment terms.
A: Basically, the payment terms are T/T, L/C at sight. Alipay.
5. Q: Can you do OEM for me?
A: We accept all OEM orders,just contact us and give me your design,we will offer you a reasonable price ASAP.