WECG400
The first parallel testing ECG tester specifically designed for wearable devices can simultaneously test ECG function on up to 4 devices with a single computer to accelerate testing time.
It provides compliance tests conforming with IEC 60601-2-47, YY0885, and YY 9706.247-2021, and can output 7 types of standard ECG waveforms to assist wearable devices in meeting regulatory requirements of accuracy.
SPECIFICATION
Standard ECG waveforms
Parameters Range Resolutions
ECG Waveform Frequency (Hz) 0.02 ~ 6Hz 0.01
Frequency (BPM) 1 ~ 360BPM 1
Amplitude (-5) ~ 5mV 0.01
Sine Frequency (Hz) 0.05 ~ 500Hz 0.01
Frequency (BPM) 3 ~ 30000BPM 1
Amplitude (-10) ~ 10mV 0.01
Triangle Frequency (Hz) 0.05 ~ 500Hz 0.01
Frequency (BPM) 3 ~ 30000BPM 1
Amplitude (-10) ~ 10mV 0.01
Square Frequency (Hz) 0.05 ~ 500Hz 0.01
Frequency (BPM) 3 ~ 30000BPM 1
Amplitude (-10) ~ 10mV 0.01
Exponential Frequency (Hz) 0.05 ~ 5Hz 0.01
Frequency (BPM) 3 ~ 300BPM 1
Amplitude (-5) ~ 5mV 0.01
Rectangle Pulse Frequency (Hz) 0.05 ~ 5Hz 0.01
Frequency (BPM) 3 ~ 300BPM 1
Amplitude (-5) ~ 5mV 0.01
Pulse width (frequency: 0.05Hz) 1 ~ 300ms 1
Pulse width (frequency: 5Hz) 1 ~ 200ms 1
Triangle Pulse Frequency (Hz) 0.05 ~ 5Hz 0.01
Frequency (BPM) 3 ~ 300BPM 1
Amplitude (-5) ~ 5mV 0.01
Pulse width (frequency: 0.05Hz) 1 ~ 300ms 1
Pulse width (frequency: 5Hz) 1 ~ 200ms 1
Input Impedance / Frequency Response Signal add-on
Parameters Range Default Values Resolutions
Play raw data Sample rate Maximum: 40K Hz - -
DC offset (non-Variable) -300, 0, +300mV 0mV 300
DC offset (Variable) (-1000) ~ 1000mV 0mV 100
Input impedance switch 100Ω (short circuit) - -
620kΩ / 4.7 nF on/off Off (on: short circuit) -
10MΩ / 180 pF on/off Off (on: short circuit) -
Product System Capacity and Standard Requirements Table
Parameters Specifications System Capability
Main output voltage accuracy ±1% for amplitudes of 0.5mVpp or higher ±0.3%
Main output voltage resolution
(DAC resolution) N/A 0.15µV
Frequency / pulse repetition rate accuracy ±1% ±0.1%
Pulse duration / timing accuracy ±1ms ±0.2ms
Resistor tolerance ±1% ±0.5%
Capacitor tolerance ±5% ±5%
Precision 1000 : 1 divider ±0.5% ±0.3%
Sample rate 5kHz ± 0.1% 10kHz ± 0.05% (50ppm)
DC offset
(fixed, noise-free, sourced from the internal supercapacitor) 300mV ± 1% 300mV ± 0.1%
DC offset
(variable, up to 1000mV) Setting ±1% or ±3mV Setting ±1% or ±3mV
Environment 15 ~ 30°C (by design)
30 ~ 80% RH (by design) 5 ~ 40°C
30 ~ 80% RH
altitude<2000M
Overvoltage CAT II