Trade assurance FURNAN VHID-F-3030 VHID-F-4040 VHP-F-30 VHP-F-40 VHPD-F-3030 VHPD-F-4040 hydraulic vane oil pump
Our product range | Hydraulic pump parts | |
Hydraulic pump parts | Cylinder block | Press pin |
Piston motor | Piston shoe | Snap ring |
Piston pump | Retainer plate | Coil spring |
Gear pump | Ball guide | Disk spring |
Charge pump | Valve plate | Barrel washer |
Pilot pump | Shoe plate | Oil seal |
Vane pump | Bearing plate | Frication plate |
Repair OEM parts | Swash plate | Steel plate |
Motor spare parts | Drive shaft | Metal |
Low pressure variable capacity vane pump VHO series features:
1. Variable capacity of the leaves of the pump, the hydraulic circuit for the need for oil and design, it can improve the efficiency of the loop.
2. Reduce the Sao, reduce the oil temperature, so that the input of energy, into an effective work, to achieve the purpose of saving power.
3. Applicable grinding machine, automatic lathe, machine tool, shoe machinery and other special machine or single machine.
Variable vane pump instructions
Direction of rotation: Clockwise (as viewed from the end of the bundle axis) is a standard product, and only this direction of rotation. The confirmation of the turning direction can be checked by the instant start motor.
Hydraulic oil: 7 MPa or less, hydraulic oil with a viscosity of 20 to 50 cSt (ISOVG32) at 40 ° C.
Below 7 MPa, use a hydraulic oil with a viscosity of 30 to 68 cSt (ISOVG46, VG68) at 40 ° C.
Drain pipe pressure: The drain pipe must be inserted directly under the oil surface of the fuel tank, and the back pressure generated by light distribution must be maintained below 0.03MPa.
Working oil temperature: The temperature of continuous operation is 15 ~ 60 ℃
Shaft center fit: The eccentricity error between the pump shaft and the motor is 0.05mm, and the angle error is 1 °
Suction pressure: The pressure at the suction port is -0.03MPa ~ 0.03MPa
Displacement adjustment: When adjusting the displacement, first loosen the adjusting nut and then rotate the adjustment bolt. Turn right to decrease the flow, and turn left to increase the adjustment
After finishing, please tighten the nut.
Pressure adjustment: Turn left (counterclockwise) the pressure adjustment bolt to reduce the output pressure, turn right (clockwise) to increase and adjust
When finished, please tighten the nut.
New machine operation: When the new machine starts running, the motor should be repeatedly started under no pressure to discharge the air in the pump and the suction pipe.
Air, in order to ensure the exhaust of air in the system, it can be continuously operated for 10 minutes under no load
Low-voltage variable capacity vane pump VHO series performance table:
MODEL | MAX PRESSURE kg/cm 2 | OUTPUT FLOW AT 3.5kg/ kg/cm 2 1800 r.p.m. l/min | PORTS SIZE | SPEED (r.p.m) | WEIIGHT(kg) | ||||
OUT | IN | DR. | MIN | MAX | FOOT TYPE | FLANGE TYPE | |||
VHO-08 | 70 | 08 | 3/8” | 1/2” | 1/4” | 900 | 1800 | 6 | 5 |
VHO-12 | 70 | 12 | |||||||
VHO-15 | 70 | 15 | |||||||
VHO-20 | 70 | 20 |
Packaging details
Standard export wooden case or as your requirements
Delivery details
1~3 days after payment
Company Information
1.ZHENYUAN hydraulic equipment Co.,Ltd has more than 30years of experiments in manufacturing CNC
machines, and plastic injection moidingmachines.
2.ZHENYUAN company has quiet office enviroment and we have independent R&D ability.
3.ZHENYUAN commpany has efficient production department and strict quality control department to supply good quality products all over the world.
Our Advantages
1.Be of long standing factory built in 1986;
2.usa professional engineer and with 5 utility models and 4 patents;
3.GRH OEM and with 370 professinal employees, 4workshops total 22000 square meters;
4.208 pcs mechanical and test equipments:
5.100% factory testing and inspection personnal in accordance with international standards for the high-frequency sampling,to ensure the quality of products manufactured;
6.Become TEREX,JOHN DEERE,HYDAC,AGCO,EATON,NEW HOLLAND,GARONER DENVER and MAHINDRA supplier.
FAQ
Q:What Is Our Main Application?
A:1.Hydraulic system
2.Agriculture machine
3.Construction machina
4.Automobile
5.Local distributors
Q:What Is The Payment Terms?
A:Full order:30% as desposit, the balance before shipment:
Small order /sample ordre: full payment in advance:
Q:Can I Mark My Own Brand On The Pump?
A:Yes. Full order can mark your brand and code.
Q:What Is Our Main Export Market?
A:Europe (41.7%):Italy,Germany,England,France,Holland,Greece,Spain,Portugal,Swissland,Finland,Czekh,Russia,Poland
Asia(40.5%):China,Korea,Singapore,India,Turkey,Iran,Vietnam,Saudi Arabia,Syria,Isreal,Lebanon
Q:How Long Is Guarantee?
A:We give 1 year guarantee.
You May Like
- Trade assurance Tokimec SQP32-25-17 double vane pump SQP21 SQP31 SQP32 SQP41 SQP42 SQP43
- Trade assurance FURNAN VHI-F-30 VHI-F-40 AHPF-30 AHPF-40 VHO/F/15 VHO/F/20 VHO-F-08 hydraulic vane oil pump
- Parker hydraulic variable displacement vane pump PVS series of PVS08,PVS12,PVS16,PVS25,PVS32,PVS40,PVS50 PVS40EH140C2
- Italian original ATOS PFE series hydraulic vane pump PFE-31022/1DU PFE-41 PFE-51
- Trade assurance FURNAN VHO-F-15-A2 VHO-F-20-A2 VHO-L-08-A2 VHO-F-20-A3 VHOD-F-1515 VHOD-F-2020 hydraulic vane oil pump
- Trade assurance OEM Denison vane pumo double pump T6EC 062 017 1R01 B1
- Original parker denison single pump T6C/D/E double pump T6CC/T6DC/T6EC/T6ED/T6EE T6EC 062 017 1R01 B1
- replace VICKERS V20-1P09P-1C Eaton vane pump hydraulic pump for injection molding machine V20-1P13P-1B10 V20-1P11P-1C11
- Trade assurance Taiwan KCL hydraulic vane pump 50T-14-FR 50T-12-FR 50T-7-FR 150T-48-F-R-01150T-61-F-R-01150T-75-F-R-01
- Trade assurance Taiwan KCL hydraulic vane pump 50T-43-FR 50T-39-FR 50T-36-FR 50T-30-FR 50T-26-FR 50T-23-FR 50T-20-FR 50T-17-FR
Popular Searches
Find Similar Products By Category
You May Like
- Trade assurance Taiwan KCL hydraulic vane pump VQ15-6-F-RAA-0 DVQ20-38-F-RAA-01 KT67QCB2-031-B11-WR00-B1-0M
- replace VICKERS V20-1P13P-1B10 Eaton vane pump hydraulic pump for injection molding machine
- Trade assurance ERLY VDC series VDC-1A-F40D-20 variable vane pump VDC-1A-F40D/F40C/F40B/F30D/F30C/F20D/F20C/F20B-20
- Trade assurance VQ series 45VTBS42A-2203CA22R Vickers Hydraulic Vane Pump 45VQTAS50A-2203CC20R
- PV7 series 1X /2X 10 16 20 40 63 100 size Hydraulic Pilot Operated Variable vane pump PV7-1A/10-14RC01-MC0-16
- PV7 series 1X /2X 10 16 20 40 63 100 size Hydraulic Pilot Operated Variable vane pump PV7-1A/10-20RE01-MC0-10
- Parker Denison T6C T6D T7C T7D T7E hydraulic vane pump Cartridge kit in stock T6C0251R00B1
- hydraulic Variable vane pump VP-SF-12-B VP-SF-20-B VP-SF-30-B VP-SF-40-B
- hydraulic Variable vane pump VP-SF-12-D VP-SF-20-D VP-SF-30-D VP-SF-40-D
- Trade assurance Replace Rexroth PVV5-1X PVV1-1X PVV2-1X PVV4-1X vane pump PVV1-1X/036RJ15UMB
- Trade assurance Vickers 2520V 3520V 3525V 4520V 4525V 4535V Hydraulic Vane Pump 2520V14A5-1AB22R
- Trade assurance VQ Double 2520V 3520V 3525V 4520V 4525V 4535V Vickers Hydraulic Vane Pump 3525V30 A14 86AA 22R
- Taiwan Kompass vane pump VD1-25F-A3 VD1-25F-A1 VD1-30F-A2 VD1-30F-A3 VD1-30F-A1 VD1-30F-A2
- Taiwan Kompass vane pump VB1-20F-A3 VB1-20F-A1 VB1-20F-A2 VB1-24F-A3 VB1-24F-A1 VB1-24F-A2 VC1-26F-A3 VC1-26F-A1 VC1-26F-A2
- Taiwan Kompass vane pump VA1-08F-A3 VA1-08F-A1 VA1-08F-A2 VA1-12F-A3 VA1-12F-A1 VA1-12F-A2 VA1-15F-A3 VA1-15F-A1 VA1-15F-A2