DW-10N Freeze Dryer
Characteristics:
Accord with international standards of Green environmental friendly
7" True-color Touch Screen, English Bilingual Interface, display drying curve and history curve;
U disk Can storage lyophilized data;
Upload software can print curve;
Embedded circuit design, 128 M FLASH, can save dozen times Lyophilized data;
Large opening trap, no coil inside, with samples pre-freeze function
Imported refrigeration compressor, low noise
Cold trap and control panel were made by stainless steel, corrosion-resistant, easy to clean
Transparent Bell type drying room, secure and ocular
Stainless steel sample holder, common sample plate spacing adjustable
Small size and easy to operate
Nitrogen inflation valve within
DW-10N | Ordinary | Top-Press | Ordinary Multi-Manifolds | Top-Press Multi-Manifolds |
No-load Temperature | <-56℃ | <-56℃ | <-56℃ | <-56℃ |
Freeze Area | 0.12 m2 | 0.08 m2 | 0.12 m2 | 0.08 m2 |
Plate Load Capacity | 1 L | 1.5 L | 1 L | |
Ability to Capture Water | 3Kg | 3 Kg | 3 Kg | 3 Kg |
Vacuum Degree | <10Pa | <10Pa | <10Pa | <10Pa |
Machine Dimension | W450×D580×H(380+450) mm | W450×D580×H(380+450) mm | W450×D580×H(380+450) mm | |
Sample Tray Size | 4×Φ200mm | Ø 3×180 mm | 4×Φ200mm | Ø 3×180 mm |
Power | 950W | 950W | 950W | 950W |
Power Supply | 110V/60Hz or 220V/50Hz | 110V/60Hz or 220V/50Hz | 110V/60Hz or 220V/50Hz | |
interlayer spacing | 70 mm | 70 mm | 70 mm | 70 mm |
Cold trap size | Ø215×160 mm | Ø215×160 mm | Ø215×160 mm | |
The number of Schering bottles | Ø22: 260 | Ø22: 165 | Ø22: 260 | Ø22: 165 |
Ø16: 480 | Ø16: 285 | Ø16: 480 | Ø16: 285 | |
Ø12: 920 | Ø12: 560 | Ø12: 920 | Ø12: 560 | |
N.W./ G.W | 80KG/95KG | 85KG/100KG | 95KG/110KG | |
Picture | | | | |
DW-10ND Electric Heating Freeze-Drying Machine
DW-10ND | Ordinary | Top-Press | Ordinary Multi-Manifolds | Top-Press Multi-Manifolds |
No-load Temperature | <-56℃ | <-56℃ | <-56℃ | <-56℃ |
Freeze Area | 0.12 m2 | 0.076 m2 | 0.12 m2 | 0.076 m2 |
Plate Load Capacity | 1.5 L | 1 L | 1.5 L | 1 L |
Ability to Capture Water | 3Kg | 3 Kg | 3 Kg | 3 Kg |
Vacuum Degree | <10Pa | <10Pa | <10Pa | <10Pa |
Machine Dimension | W450×D580×H(380+450) mm | W450×D580×H(380+450) mm | W450×D580×H(380+450) mm | W450×D580×H(380+450) mm |
Sample Tray Size | 4×Φ200mm | Ø 3×180 mm | 4×Φ200mm | Ø 3×180 mm |
Power | 950W | 950W | 950W | 950W |
Power Supply | 110V/60Hz or 220V/50Hz | 110V/60Hz or 220V/50Hz | 110V/60Hz or 220V/50Hz | 110V/60Hz or 220V/50Hz |
interlayer spacing | 70 mm | 70 mm | 70 mm | 70 mm |
Cold trap size | Ø215×160 mm | Ø215×160 mm | Ø215×160 mm | Ø215×160 mm |
The number of Schering bottles | Ø22: 260 | Ø22: 165 | Ø22: 260 | Ø22: 165 |
Ø16: 480 | Ø16: 285 | Ø16: 480 | Ø16: 285 | |
Ø12: 920 | Ø12: 560 | Ø12: 920 | Ø12: 560 | |
N.W./ G.W | 90KG/ 105KG | 95KG/110KG | 105KG/120KG | 110KG/125KG |
Picture | | | | |
DW-10ND In-situ (Electric Heating) Freeze-Drying Machine
Pre-freeze drying process at in situ situation, high transparent organic glass door to observe working procedure
Shelf temperature adjustable, controllable, detectable; its suitable for pilot scale and small production
LCD screen display, PID control, drying curve displayed on the screen
Square tray is shape not easily to deformed, easy to operate and clean
With Gas charging valve can fill with inert gases like nitrogen gas
DW-10ND | Ordinary | Top-Press |
Temperature Range | -45~60℃ | -45~60℃ |
Freeze Area | 0.2 m2 | 0.1 m2 |
Plate Load Capacity | 2 L | 1 L |
Ability to Capture Water | 3Kg/24h | 1.5 Kg/24h |
Vacuum Degree | <10Pa | <10Pa |
Machine Dimension | 820*650*550 mm | 820*650*550 mm |
Shelf Size | 240*430*20 mm | 240*430*20 mm |
Power | 1000W | 1000W |
Power Supply | 110V/60Hz or 220V/50Hz | 110V/60Hz or 220V/50Hz |
interlayer spacing | 70 mm | 70 mm |
No-load Temperature | ≤-55 ℃ | ≤-55 ℃ |
The number of Schering bottles | Ø22: 370 | Ø22: 155 |
Ø16: 768 | Ø16: 384 | |
Ø14: 970 | Ø14: 485 | |
Ø12: 1300 | Ø12: 650 | |
N.W./ G.W | 210KG/230KG | 230KG/260KG |
Drying chamber shape | square | square |
Picture | | |
