Smart series water purification system

n The smallest and most compact lab water system from tap to ultrapure water, integrating pretreatment, RO, DI, UV, UF and terminal filter into one.

n Whole case with one time injection molding process, material: polypropylene, avoid rusting and keep clean, to meet GLP standard.

n Top cap of pretreatment in the case can be rapidly opened to replace the cartridges without opening the case.

n System automatically works, with electronic pressure sensor and microcomputer controlling.

n Automatic stop without water, automatic stop when water tank full, automatically cutting off water when pump stopping, guaranteeing 24 hours’ work.

n Auto self-flushing of RO membrane function, extend RO membrane’s life.

n On-line resistivity monitor, with apheliotropic LCD display, to detect the quality of deionized or ultrapure water.

n Attached portable TDS (total dissolved solid)/conductivity test pen, with dry cell design, to detect the quality of feed water and RO water.

n External water tanks is optional to meet different need and assure ample water-supply.

n Tube and adapter with NSF authorization and top quality, reduce TOC level and assure ultrapure water’s quality.

n Long life pretreatment (including PP fiber, and active carbon cartridge), effectively protect RO membrane.

n RO module with DOW’s membrane, ensure long life, stable operation and high desalinization rate.

n 4 independent ultrapure cartridges with DOW’s top polishing resin, ensure ultrapure water’s quality up to 18.2 MΩ.cm, with the lowest TOC level and running cost.

n Double wavelength (185&254nm) ultraviolet lamp module, restrain bacteria’s increase and reduce TOC.

n MWCO 5000D ultrafiltration module, effectively eliminate endotoxin, and suitable for precise cell cultivating and IVF.

(0.45+0.1)µm double layer PES terminal disinfection filter, assure that terminal pure water is absolutely axenic.

Smart-RO series reverse osmosis water system (Tap water inlet)

Specifications

Remarks:

*The value will be influenced by temperature and feed water’s quality.

Smart-Q series deionized water system (Tap water inlet)

Smart-S series ultrapure water system (Tap water inlet)

With injection molding process case, single stage RO system, 1 pump, portable TDS test pen and on-line resistivity monitor, Smart-S series ultrapure water system is sub-economic choice of ultrapure water for high grade experiments.

With tap water inlet, its output ranges from 15 to 30 liters/hour. It can produce single stage RO water and ultrapure water. The single stage RO water’s ion rejection rate is more than 96%, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.

Smart-D series ultrapure water system (Distilled water inlet)

With injection molding process case, 1 pump, portable TDS test pen and on-line resistivity monitor, Smart-D series ultrapure water system is sub-economic choice of ultrapure water for high grade experiments.

With pure water or distilled water inlet, its output is up to 2 liters/minute. It can produce deionized water and ultrapure water. The deionized water’s resistivity is above 5MΩ.cm, and the ultrapure water’s resistivity absolutely reaches to 18.2MΩ.cm. It completely meets the highest grade I standard of ASTM, CAP, CLSI, EP and USP.