Specifications
High quality waterproof terminal connector1.heat-shrinkable
2.super high strength and hot-melt adhesive
3.insulation and sea
DUAL WALL HEAT SHRINKABLE TUBING FOR CRIMP SEALING
Features/Applications-sleeves tubing
HBCS heat-shrinkable tubing is manufactured by co-extrusion polymeric materials with super high strength and hot-melt adhesive. Designed to provide both insulation and Sealing for wire connector.
Shrink ratio: 3:1
Operating temperature: -55°C~125°C
Minimum full shrink temperature: 110°C
Standard color: Clear, Red, Clear, Yellow, Clear, Blue
Technical data:
Property | Test Method | Typical Data |
Tensile strength | ASTM D 2671 | 28MPa(min) |
Elongation at break | ASTM D 2671 | 500%(min) |
Longitudinal shrinkage | UL224 | 0 to -10% |
Heat shock Tensile strength Ultimate elongation | 250°C,4hrs | No cracking, flowing of out wall 270%(min) |
Heat resistance | 165°C/168 hrs | No cracking, flowing of out wall |
Cold bend -55°C,4 hr | ASTM D 2671 | No cracking of outer wall |
Voltage withstand AC 2500V, 60seconds | ASTM D 2671 | No breakdown |
Volume resistance | ASTM D 876 | 1014Ω.cm(min.) |
Copper corrosion(158°C,168hrs.) | UL224 | Pass |
Water absorption | ASTM D 570 | <0.5% |
Fluid resistance(23 °C/ 24 hrs) | ASTM D 2671 | Good to excellent |
Specific gravity |
| 0.96 |
Dielectric strength | ASTM D 2671 | 32KV/mm |
Normal size (mm)
| As supplied (mm)
| After recovered (mm)
| Standard length (m) | ||
Inside diameter (min.) | Inside diameter (Max.) | Total Wall thickness (Nom.) | Adhesive Thickness (Nom.)
(nom.) | ||
4.5 | 1.3 | 1.3 | 1.30 | 0.56 | 100 |
5.0 | 1.9 | 1.8 | 1.52 | 0.76 | 100 |
6.5 | 2.2 | 2.2 | 1.91 | 1.12 | 100 |
