Chalk marker/ chalk making machine
Chalk making procedure:
1*. Slaked Lime mixer, power on, then fill in the water.
The rate for the slaked lime and water is half to half.
2*.The mold should be lubricated enough. And should be lubricated for every cycle
3*. Each model has 808 spaces for the filling, each cycle will be take about 6minutes,
4*. When the filling completed, should be turn off the model make the wet chalk come off from the model, then dry in the sun.
5*. The packing should be completed by handwork.
6*.The shape can be round, rectangle, or star shape.
The length of the chalk can be from 75mm-105mm.
Technical Parameters of chalk machine:
Model | Capacity (pcs/h) | Mold Specification (pcs/ mold) | Packing dimensions (mm)
| Mold number | Weight (kg) | Operator |
TZ800-1 | 4000-8000 | 800 | 660*480*360 | one | 65 | One |
TZ800-2 | 8000-12000 | 800 | 1800*1150*800 | two | 260 | One |
TZ800-4 | 12000-24000 | 800 | 1800*1150*800 | four | 350 | One |
TZ800-6 | 24000-32000 | 800 | 1800*1150*800 | six | 600 | two |
TZ800-8 | 32000-48000 | 800 | 1800*1150*800 | eight | 800 | three |
Remarks:
Chalk dimensions: 10mm (big head)×8mm (small head)×75-105mm(length)
The model capacity can be as per customers’ request
Chalk shape: round, rectangle, star or per customers’ request
Photo show:
