Product Details

1. details for chalk making machine

1.Fill the water into the slaked lime mixer,the rate of slaked lime and water is half to half,

but the slaked lime should be good quality.

2.The mould should be lubricated enough and lubricated every cycle,also need to be clean

on time.

3.Each mould has 80 spaces for the filling,each cycle will take 6 minutes.

4.When the filling completed, turn over the mould, wet chalks come off the mould,and then

dry them in the sun or dryer.

5.The packing should be completed by hand.

6.Final shape can be round,rectangle,or star shape.The length of the chalk can be 75mm-

105mm.

2. details parameters of chalk making machine

Model	Capacity	Weight	Volume
TZ800-1	6,000-8,000 pcs/h	70 kg	0.8 m3
TZ800-2	8,000-12,000 pcs/h	300 kg	1.65 m3
TZ800-4	12,000-24,000 pcs/h	400 kg	2.5 m3
TZ800-6	24,000-32,000 pcs/h	650 kg	3 m3
TZ800-8	35,000-48,000pcs/h	800 kg	3.5 m3
Remarks: the size of the chalk: the diameter of two heads are 10mm and 8mm. The length is 75mm.Or we can produce mold as your requirement.

3. photos of chalk making machine