waste tire recycling machine is used to all kinds of tyre, such as the truck tire, car tire, soild tire,OTR tyre etc. Make them becomes as the TDF as the material for the new energy, or crushing as the fineness rubber powder, as the raw material of new tyre, or the football playground, or as the new rubber block through the melting. it as also could be as the raw material of the rubber plate to reduce the shaking or others.        

characters:                                                                                                                          

1.The full autoamtic controlled by the PLC system.                                                         

2. The whole system is environmental friendly, there is fit the filter dust removal.                                                          3. High efficiency processing by the physical mechinical method.                                  

4. Low noise                                                                                                                         

5. The finals products is as customer requirement                                                         

working principle                                                                                                                 

the waste tire or rubber belt will be removed the tyre beader, after that the rubber rim will be put into the three in one rubber processing machine to cutting them into smaller chips, the outcomes size is approx 50-100mm. the secondary is the two rollers grinder machine to cut the material into powder with the chips, the vibration table will sort the rubber powder out, the magnetic separator will sort the Steel wire out, the 2th vibration table to remove the Nylon from the material. magnetic separator box will remove the rest steel wire from the rubber material, then collecting by the jumbo bags system. if the material is the Radial Nylon tire, the material of Nylon connected by the cyclone with the blower.                                                                                    

The rubber purity could reach 99%, the wire parts purity approx 98%. 

Technical parameters