Product Details

Performance and use:

Applicable to high temperature, high pressure, high viscosity polymer filtration, filter out solid particles in the medium, and ensure the cleanliness of the medium.

Made of 100% stainless steel material, can be cleaned and used repeatedly.

The filter element made of imported stainless steel fiber sintered felt has good air permeability, large dirt holding capacity and long service life.

The filter element made of stainless steel woven mesh has uniform pore size, high strength, good processability and easy cleaning.

The corrugated filter element is suitable for chemical fiber and textile systems, and the disc filter element is suitable for plastic industries such as film and packaging materials.

Difference	Sintered mesh filter element	Sintered felt filter element
Material	Cleaning cycle	Metal fibers of different wire diameters
Process	Produced at 1260℃	Produced at 1180°C
Structure	Multi-layer wire mesh composite with uniform filter aperture	With multiple gradient pore size layers, it has a greater dirt holding capacity
Blind hole rate	Basically no blind holes	More or less blind holes
Filter accuracy	1-300um	2-60um
Cleaning cycle	Both are materials that can be reused after cleaning, but sintered felt has a larger dirt holding capacity and a longer cleaning cycle.

Technical parameters:

Working pressure: ≤31.7Mpa

Working temperature: ≤300℃

Medium viscosity: ≤260Pa▪s

Allowable pressure difference: ≤10Mpa

Breathability		Porosity		Pollution holding capacity		thickness		Breaking strength
L/(min.dm2)		(%)		(mg/cm2)		(mm)		(MPa)
Basic Value	Deviation	Basic Value	Deviation	Basic Value	Deviation	Basic Value	Deviation	Basic Value	Deviation
47	10%	75	10%	5	10%	0.3	10%	32	10%
63		76		6.5		0.3		36
105		75		7.8		0.37		32
205		79		8.6		0.4		23
280		80		15.5		0.48		23
355		80		19		0.62		20
520		80		26		0.63		23
670		78		29		0.68		26
1300		85		36		0.62		28