600ML Self Leveling Polyurethane Concrete PU Jointed Sealant for Highways Airport Runways Bridges and Road Expansion Joints

∎Technical Data Table

Note：All data above were tested under special condition (7 days after full cured).

∎Product Description

PU-360 is High quality one component polyurethane with excellent elastic joint material.

∎Key Features

1.Odorless, Eco-friendly, No Harm to the Builder

2.Excellent Waterproof, Best Sealing, Bright Color

3.Resistant to Oil, Acid, Alkali ,Puncture, Chemical Corrosion

4.Single Component, Self-leveling, Easy to Use, Convenient Operation

5.800+ Elongation, Super-bonding without Crack

Resistance to Tear, Puncture, Abrasion

∎Typical Applications

1.Bonding and sealing for the gap of joints of road, airport runway, square, wall pipe, wharf, roof, underground garage and basement.

2. Sealing for leakage of oil refinery and chemical plant.

3. Bonding and sealing for industrial floor, such as epoxy floor and all kinds of

paint surface.

4. Excellent bonding, sealing and repairing of various kinds of materials, such as

concrete building, wood, metal, PVC, ceramics, carbon fiber, glass, etc.

.

∎Packing Specification

●Bag         500ml

●Sausage      600ml

●Pail/Drum     20kg/drum, 230kg/drum

20pcs per box

20kg pail, 36 pails per pallet

∎Directions for Use

● Cleaning:The substrate surface must be solid, dry and be clean.Such as no dust, grease, asphalt, tar, paint, wax, rust, water repellent, curing agent, isolating agent and film. Surface cleaning can be dealt with by removing, cutting, grinding, cleaning, blowing, and so on.

● Operation:Put the sealant into the operating tool,then injecting it into the gap.

● Reservation gap:The construction joint will expand as the temperature change,so the surface of the sealant should be lower than 2mm of the pavement after construction.

● About maintenance time: At the standard state, the maintenance time is about 5 hours. It depends on the actual construction conditions. The standard state is that the temperature is 23±2℃,and the humidity is 55 ± 5%RH.

● Operation Methods: Because the packing is different, the construction methods and tools are slightly different. The specific construction method.

∎Attention of operation

● Don’t mix alcohol into the product, it will cause the product invalid. The tools with the alcohol can’t be used before cleaning well.

● Avoid contact with eyes and skin. If contact with your skin, scrub first with soap water or alcohol, then rinse with water. If contact with your eyes, rinse with plenty of water, and seek medical treatment immediately.

● It is forbidden to build on the surface of the wet substrate.

●Transportation: Avoid damp, high temperature,isolation and rain, far away from heat, handle with care and prohibit extrusion collision.

● Tools Cleaning : It can be soaked in toluene or xylene. It is strictly forbidden to immerse in alcohol and other alcohol solvents.If it is not used for a long time, it should be cleaned immediately with alcohol or other organic solvents. The cured glue can only be scraped or torn off.

∎Transport &Storage

● Transport: Keep the sealed product away from moisture, the sun, high temperature and avoid collisions.

● Storage: Keep the sealed product into cool, dry place.

● Storage temperature: 5~25℃. Humidity: ≤50%RH.

●Cartridge and Sausage :9 month. Pail/Drum:6 month.

Notice:If the temperature is higher than 40 ℃ or the humidity is more than 80%RH, the shelf life may be shorter.

Any inquiry, welcome to talk more with us cell/whatsapp:+8618321208486.