Name: 500kN 700kN 1000kN Hpu Towing Winch Anchor Marine Winch & Hydraulic Windlass Anchor Winch
Brand: ENJUE
Availability: InStock

Product Details

Product introduction:

Electric Marine Windlass Mooring Anchor

ENJUE marine is a professional supplier of marine windlass, marine winch, marine capstans, marine crane, marine grab etc. We can customize ordinary or special marine windlass and winch for your application according to your drawings or requirement with

good quality at competitive price.

The towing winch must be installed on the ship's foundation through support plates and attached to it by welding. The winch must be bolted to the support plates . Supporting plates with bolts must be supplied with a winch
Combined anchor windlass mooring winch is a device of marine equipment used for boat or ship anchoring (drop and hoist anchors) to holds a boat in place to a pier or similar fixture. The marine windlass/winch contains an anchor windlass and a winch drum around which sailors can wrap rope, chain, or cable.

Application - execution of anchor-mooring operations.
1. Type - reversible anchor-mooring capstan with electric drive for 50К2 cable bridle, one-decked, single, with below deck electric engine location, with roller stopper (see drawing 1)
2. Design rules - anchor-mooring capstan and its ancillary equipment shall comply with the requirements CCS ABS OR RMRS, edition 2018;
3. Number of anchor-mooring capstans on board (left-hand and right-hand) - 1 set for each;
4. Number of roller stoppers on board (left-hand and right-hand) - 1 set for each;

5. Nesting - on open deck:

About the parameter

40 mm hydraulic combined windlass mooring winch

Chain dia.:	φ40(AM2)	Driving Type	Hydraulic
Working load:	68kN	Rope capacity of drum:	160m
Overload pull:	102kN	Motor displacement:	2975ml/r
Holding load:	403kN	Motor Model:	Y180L-4-H
Anchor-lifting speed:	≥9m/min	Motor Power:	22kW
Working load of drum	50kN	Motor Duty:	400V/50Hz
Braking load:	150 kN	Flow rate:	50L/min
Nominal mooring speed:	≥12m/min	System pressure :	16MPa
Cable dia.:	φ40mm	drum;	single drum

Our Services:
Act as a good adviser and assistant of client, we can help them to get rich and generous returns on their investment.

1.Pre-sale services:
a: Design customised project for clients.
b: Design and manufcture products according to clients special requirement.
c: Train technical personnel for clients.

2.Services during the sale:
a: Help clients to find reasonable freight forwarders ahead of delivery.
b: Help clients to draw solving plans.

3.After-sale services:
a: Assist clients to prepare for the construction scheme.
b: Install and debug equipment.
c: Train the first-lin operators.
d: Examine equipment.
e: Take initiative to eliminate the troubles immediately.

If you are interested in our products, pls feel free to contact with us by email or WHATSAPP , if you can provide below inquiry informaion that would be better :
1. What type of drive do you need? Diesel, electric or hydraulic?
2. what is the rated pulling force?
3. Is wire rope or chain used?
4. what is the operating speed of the wire rope or chain?(m/min)
5.What is the diameter and length of the wire rope or chain used on the reel?(mm Ton)
6.What is the voltage of the power supply?(Voltage---50Hz/60Hz---3Phase)
7.Does the winch need to be classified in any country?(CCS,ABS,DNVor other)
8.How many winches do you need?(set)

Please never hesitate contact with me! Your reliable partner! You can also contact with me in Whatspp:+8615102153877.