T04E T3/T4 .63 TURBO TURBOCHARGER COMPRESSOR 300+HP W/ INTERNAL WASTEGATE V-BAND

turbocharger pictures T3T4

 

 

 

 

 

 

 

 

TURBOCHARGER INFORMATION 

 

 

 

Manufacturer Part Number T04E t3t4
Placement on Vehicle Left,Right,Front,Rear
Fitment Type Performance/Custom
Superseded Part Number SDD-TBCT04ET
Surface Finish Cast
Intake Inlet/ Outlet 3.00"/ 2.00"
Inlet / Outlet Diameter 3" / 2"
Compressor A/R 0.53
Compressor Inducer /Exducer (MM) 52.9 / 76.00
Compressor Trim 57
Exhaust (Downpipe) Flange Standard T3/ T4 4-Bolt
Exhaust (Turbo Manifold) Flange Standard 2.50" Inner Diameter V-Band
Turbine A/R 0.63
Turbine Inducer / Exducer (mm) 64/ 55.9
Turbine Trim 58
This T3/T4 hybrid turbocharger assembly is created by installing a T4 compressor wheel and housing onto a T3 turbine housing, wheel and center section. A T3/T4 hybrid turbocharger assembly is a compromise for engines where a T3 turbocharger is too small to reach the desired maximum horsepower but using a T4 turbocharger would create an unacceptable amount of turbo lag. The T3/T4 turbocharger is designed to be used on engines displacing 1.6L-2.5L and is typically good for around 400HP. They are also commonly used in twin turbo applications. In this case those figures would be doubled 3.2L-5.0L engines up to 800HP. Horsepower ratings are generally meant to express the turbochargers maximum airflow capability. Recommended boost pressures are 7psi(.5 Bar) to 21psi(1.5 Bar) and boost pressures should not exceed 30psi(2 Bar). Exceeding 21psi(1.5 Bar) of boost pressure can significantly reduce a turbochargers lifespan. Generally speaking 14psi(1 Bar) is good for a 100% increase in horsepower from a naturally aspirated engine. Also factory non-turbo engines without forged internal components on high octane pump gas (91-92 octane) it is not recommended exceeding 7psi (.5 Bar) of boost. Doing so could result in damaging your engine.
Specifics and Features:
100% brand new
Capable of boosting horse power up To 300+ BHP
High quality material, cast housing with durable steel
4 bolt exhaust flange
Capable of 8 PSI or 15-25 PSI output at peak power
Internal wastegate setting: 8 PSI
Compressor:
3" Inlet
50.55 Inducer
57 Trim
Turbine:
T3 Type Turbine Flange
.63 A/R
65.2 Inducer
56.06 Exducer
Includes:
1 X T04E Turbocharger
Notes:
Universal application. Additional parts will be needed to complete install. Please consult professional turbo installer for details

 

 

WARRANTY

 

1. every turbo is 100% new. 

 

2. twice dynamic balanced test 

 

3. All the turbocharger will be warranty for one year (broke because of manufacture fault)In this case we will change a new send repair kit or new chra or new turbo to customer for free.

 

PACKAGE

 

 

 

 

 

PAYMENT 

 

we accept paypal , western union, TT or pay it through alibaba.

 

factory information 

 

Heng-YI turbocharger Ltd Inc.is specilally in manufacturing and selling turbocharger which founded in 1994. Our company is located in fengcheng Liaoning province where is famous for tobocharger.

Our factory occupy more than75000 square feet where hundreds of types of turbocharger are assembled.

The breadth and depth of our product are unmathed in the industry which enabling us to support a variety of market application wordwide,including industrial,commercial transport,marine,light truck and desiel/gasoline passenger car.Our gasoline engine turbochargers are made for most leading automotive brands including Mitsubishi,Subaru,Audu,passsat,volvo,Bora,Toyota,Renault,Pajero,Nissan,Hyundai,Kia,Isuzu and the diesel engine tubochargers are made for various of famous industrial diesel engine brand like komatsu,Hitachi,Carter,Kamioka,Proton,Daewoo etc.Our diesel turbochargers can also be used in marine,agricultural machinery,genrators sets and many other four-cylinder, six-cylinder vehincles.

To meet the increased higher requirement from market,in 2004 we imported from hardinge inc.(USA)the super-precision multi-tasking CNC(computer Numerical controlled)lathes,high-performance vertical and horizontal muti-tasking CNC machining centers, Jones and shipman surface grinding machine and from JTEKT(Japan) the superprecision CNC grinder.Those best in class machine to guarantee the balaning and defect-free of our turbochargers.Upon today,we have customers from all over the world,including USA Ressia,Spain.Italy,Singapore,Malaysia,Thailand,Poland Iran and Iraq.

The misson of our company is to provide the highest products with the best price.We are looking forward to doing business with you.

 

contact with Jane  

whatsapp:+86 18841547653

weichat:18841547653

QQ :2845030186

Tel:+86 18841547653