BL124 Modbus to Ethernet/IP gateway is a device that enables communication between Modbus devices and Ethernet/IP networks. The Modbus to Ethernet/IP gateway serves as a bridge between devices that use the Modbus protocol and devices that use the Ethernet/IP protocol. This allows for seamless communication and data exchange between different parts of an industrial system that may use different protocols.
Features
Ø Downlink supports: Modbus RTU
Ø Uplink supports: Ethernet/IP
Ø 2CH RS485
Ø The network port can be configured via a web interface
Technical Parameter
Parameter | Description | |
Power Supply | Input Voltage | DC 9～36V |
Power Consumption | Normal: 50mA@12V, Max: 20mA@36V | |
Ethernet Port | Specification | 2 x RJ45, 2x10/100Mbps |
Protection | ESD: ±6kV(Contact), ±8kV(Air) EFT: 1kV, 5kHz | |
Serial Port | QTY | 2CH RS485 |
Baud Rate | 2400, 4800, 9600, 19200, 38400, 57600, 115200 | |
Data Bit | 8 | |
Parity Bit | None, Even, Odd | |
Stop Bit | 1, 2 | |
Mode | RTU Master/Slave | |
Function | 01H, 02H, 03H, 04H, 05H, 06H, 0FH, 10H | |
Connection | Up to 31 connections to a single serial port | |
Protection | ESD ±6kV(Contact), ±8kV(Air) EFT ±1kV, 5kHz | |
Indicator | PWR | Always on when device powered on |
RUN | Flickering when system running | |
LINK | Flickering when TCP communicating | |
RS485 | Flickering when communicating | |
Software | Protocol | Ethernet/IP, Modbus RTU |
Max input/output data volume | Default bytes "2Bytes" | |
Max Input Bytes ≤496Bytes | ||
Max Output Bytes ≤496Bytes | ||
File | EDS | |
Safety Regulations | EMC | IEC 61000-4-2 (ESD) Level 3 |
IEC 61000-4-4 (EFT) Level 3 | ||
IEC 61000-4-5 (Surge)Level 3 | ||
Others | CE, FCC, RoHs | |
Environment | Working | -30～55℃, 5～95% RH |
Others | Housing Material | Plastic |
Size | 30×83×110mm(LxWxH) | |
Protection | IP30 | |
Mounting | DIN Rail Mounting |
Note: When configuring with function code 01 or 02, to facilitate the calculation and display of 2 bytes on the PLC, configure in double bytes as much as possible. For function code 03 or 04, the configuration must not exceed 125 data points (in accordance with Modbus specifications).
