Product Details

BL124 Modbus to Ethernet/IP gateway is a device that enables communication between Modbus devices and Ethernet/IP networks. The Modbus to Ethernet/IP gateway serves as a bridge between devices that use the Modbus protocol and devices that use the Ethernet/IP protocol. This allows for seamless communication and data exchange between different parts of an industrial system that may use different protocols.

Features

Ø Downlink supports: Modbus RTU

Ø Uplink supports: Ethernet/IP

Ø 2CH RS485

Ø The network port can be configured via a web interface

Technical Parameter

	Parameter	Description
Power Supply	Input Voltage	DC 9～36V
Power Supply	Power Consumption	Normal: 50mA@12V, Max: 20mA@36V
Ethernet Port	Specification	2 x RJ45, 2x10/100Mbps
Ethernet Port	Protection	ESD: ±6kV(Contact), ±8kV(Air) EFT: 1kV, 5kHz
Serial Port	QTY	2CH RS485
	Baud Rate	2400, 4800, 9600, 19200, 38400, 57600, 115200
	Data Bit	8
	Parity Bit	None, Even, Odd
	Stop Bit	1, 2
	Mode	RTU Master/Slave
	Function	01H, 02H, 03H, 04H, 05H, 06H, 0FH, 10H
	Connection	Up to 31 connections to a single serial port
	Protection	ESD ±6kV(Contact), ±8kV(Air) EFT ±1kV, 5kHz
Indicator	PWR	Always on when device powered on
	RUN	Flickering when system running
	LINK	Flickering when TCP communicating
	RS485	Flickering when communicating
Software	Protocol	Ethernet/IP, Modbus RTU
	Max input/output data volume	Default bytes "2Bytes"
		Max Input Bytes ≤496Bytes
		Max Output Bytes ≤496Bytes
	File	EDS
Safety Regulations	EMC	IEC 61000-4-2 (ESD) Level 3
		IEC 61000-4-4 (EFT) Level 3
		IEC 61000-4-5 (Surge)Level 3
	Others	CE, FCC, RoHs
Environment	Working	-30～55℃, 5～95% RH
Others	Housing Material	Plastic
	Size	30×83×110mm(LxWxH)
	Protection	IP30
	Mounting	DIN Rail Mounting

Note: When configuring with function code 01 or 02, to facilitate the calculation and display of 2 bytes on the PLC, configure in double bytes as much as possible. For function code 03 or 04, the configuration must not exceed 125 data points (in accordance with Modbus specifications).