Product Details

ATMOSPHERE FURNACE

Atmosphere Furnace is used in many industrial and laboratory research applications, where heat treatment is done under inert atmosphere. This inert atmosphere furnace is supplied with vacuum pump, gas flow meter and needle valves for vacuum and gas purge. Usually, Argon (Ar) and Nitrogen (N2) gases are used to create inert atmosphere. For specific applications; where, hydrogen gas is used, we also make such atmosphere furnace with explosion proof safety provisions.

TECHNICAL SPECIFICATIONS

Max. temperature	1200°C	1400°C	1700°C
Working temperature	1100°C	1300°C	1600°C
Temperature accuracy	±1°C	±1°C	±1°C
Thermocouple	K Type	S type	B type
Heating rate	0 – 15°C / min	0 – 15°C / min	0 – 15°C / min
Temperature controller	Programmable PID controller Single program w/ 30 steps for Ramp & Soak Built-in auto tune function
Heating element	Fe-Cr-Al-Mo wire	U shape Sic heating elements	U shape Mosi2 heating elements
Furnace chamber	1430°C ceramic fiber board	1700°C ceramic fiber board	1800°C ceramic fiber board
Door	Swing type door w/ screw locks
Gas	Nitrogen, Argon or any inert gas
Vacuum display	Dial type vacuum gauge
Vacuum pump	Rotary vacuum pump
Gas fittings	Stainless steel needle valves for Vacuum & Gas purge
Safety features	Over load protection Door safety limit switch keeps heater off when door is open

STANDARD SIZES / DIMENSIONS

Inner Chamber (W x H x D)	Inner Chamber (W x H x D)	Volume
100 x 100 x 100 mm	4 x 4 x 4 Inch	1 Liter
150 x 150 x 200 mm	6 x 6 x 8 Inch	5 Liters
200 x 200 x 300 mm	8 x 8 x 12 Inch	12 Liters
300 x 300 x 400 mm	12 x 12 x 16 Inch	36 Liters