Electromagnetic brake 450SE,5SE power failure protection brake is a specially designed braking system that relies on electricity to activate and maintain the braking state. When the power supply is interrupted or the system detects a fault, the brake will be activated quickly to provide strong braking force to ensure the safety of equipment or machinery.

Main components

① Brake frame;

② Brake components;

③ Control device

Product features

Working brake

1. High braking force, low maintenance cost, with automatic compensation device for pad wear (stable braking torque), short response time.

2. Large installation tolerance, brake disc end face runout: maximum value: ± 0.2mm. The verticality deviation of the base relative to the disc: maximum value: ±4‰.

3. The center distance deviation of the brake disc relative to the base: maximum value: ±2.5mm.

Safety brake

1. Large braking force, the same as the working brake.

2. When overspeed is detected, it is used as an emergency brake. Under normal circumstances, the static brake has a short response time.

3. Large installation tolerance, brake disc end face runout: maximum value: ±0.2mm. The verticality deviation of the base relative to the disc: ±0.4%.

4. All SE series are electromagnetic release. A matching power supply ESE/ES is required for operation.

Additional devices

According to different needs of users, the following devices can be installed:

Pad wear display (realized by display switch or wear line in pad).

Brake display (realized by display switch).

Manual release display (realized by display switch)

Special applications: sintered pads for very high disc temperature, special pads (no sparks, etc.); special discs (thickness, diameter, material, etc.).

Usage conditions

* Ambient temperature: -20℃ -50℃. There must be no flammable or explosive gases in the surrounding working environment.

* The relative humidity of the air is not more than 90%.

* The altitude of the place of use complies with GB755-2000.

* Anti-corrosion products should be used for outdoor rain and snow erosion or corrosive gases and media.

Applicable fields

Lifting and transportation equipment

Metallurgy field

Mines

Ports

Construction machinery

Cables

Sling equipment

Wind turbines

Textile machinery