Product Details

The R10 industrial router can provide wireless access network, and also can performs Modbus Master to poll meters over RS485/232 or LAN ports, then upload the data to cloud platforms under MQTT format, e.g.: AWS IoT, ThingsBoard. And the R10A industrial router can connect the remote I/O modules either by RS485/232 or Ethernet cable to monitoring data or switch on/off devices, etc.

The 4G Edge router features programmable logic control, timer, event trigger, IP connection alarm functions.

R10A industrial router also can used as Modbus RTU/TCP Master to collect data, convert Modbus to MQTT protocol, Transmit Transparently (Pass-through), and directly connect to cloud platforms such as AWS, THINGSBOARD etc.

When the industrial router communication fails, the data will be automatically restored and retransmit when communication restored.

Item	Parameters	Description
Power Supply	Input voltage	9~36VDC
	Input current	Normal: 130mA@12V. Maximum: 800mA@12V
	Connection	3.5mm wiring terminal
	Protection	Anti-reverse connection Protection
WAN	Qty	1
	Interface Spec	RJ45 interface, 10M/100Mbps, adaptive MDI/MDIX
	Protection	ESD ±30kV (contact), ±30kV (air) EFT 40A (5/50ns) Lightning 24A (8/20µs)
LAN (non-POE)	Qty	1
	Interface Spec	RJ45 interface, 10M/100Mbps, adaptive MDI/MDIX
	Protection	ESD ±30kV (contact), ±30kV (air) EFT 40A (5/50ns) Lightning 24A (8/20µs)
Serial Port	Qty	1
	Type	1 Channel RS485 or RS232
	Baud rate	1200,2400,4800,9600,14400,19200,38400,57600,115200,230400
	Data Bit	5,6,7,8
	Parity	None, Even, Odd
	Stop Bit	1,2
	Working mode	Transparent transmission, Modbus RTU to TCP, Modbus slave, Modbus master ( R10A support but R10 can't)
	Protection	ESD contact: 8KV Surge: 4KV (8/20us) ESD ±8kV (contact), ±15kV (air) EFT 4KV, 40A (5/50ns)
WIFI	Antenna Port qty	2
	Antenna type	SMA hole type
	Protocol	802.11a/b/g/n (mixed)
	Mode	AP mode, client mode
	Frequency	2.4G
	Channel	Channel 1 - 13
	Security	Open, WPA, WPA2
	Encryption	AES, TKIP, TKIPAES
	Connection number	16(Max)
	Speed	300Mbps(Max)
	Transmit Distance	Max. 20 meters in open space where there is no obstruction
	SSID Broadcast Switch	Support
Cellular Network	Antenna Port Qty	1
Cellular Network	Antenna Port Type	SMA hole type
SIM	Qty	1
	Interface Spec	Drawer interface, support 1.8V/3V SIM/UIM card (NANO)
	Protection	Built-in 15KV ESD protection
GPS (optional)	Antenna qty	1
	Antenna type	SMA hole type
	Tracking Sensitivity	> -148 dBm
	Horizontal Accuracy	2.5m
	Protocol	NMEA-0183 V2.3
Indicator light	SYS	System running indicator (blinking for 2S and then off after normal operation)
	4G	4G cellular operating status indicator ( when SIM registered successfully, this indicator always on )
	WAN	WAN status indicator
	LAN	LAN status indicator
System	CPU	MIPS CPU, main frequency 580Mhz
	Storage	128Mbits SPI Flash
	RAM	1024Mbits DDR2
Software	Network Protocol	PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, HTTPs, DNS, ARP, NTP, SMTP, SSH2, DDNS
	VPN	IPsec, OpenVPN, L2TP
	Firewall	DMZ, DoS defense, IP packet, domain name and MAC address filtering, port mapping, access control
	Remote Management	Supports web remote configuration
	System Log	Support
	Firmware Update	Supports serial port local TFTP and Web upgrade
Certificate	EMI	EN 55022: 2006/A1: 2007
	EMS	IEC(EN)61000-4-2(ESD) IEC(EN)61000-4-3(RS) IEC(EN)61000-4-4(EFT) IEC(EN)61000-4-5(Surge) IEC(EN)61000-4-6(CS) IEC(EN)61000-4-8
	Others	CE, FCC, ROHS, 3C
Working Environment	Working temperature	-20~+65ºC
	Storage temperature	-40~+85ºC
	Humidity	5 ~ 95%RH (non-condensation)
Others	Enclosure	Metal material
	Size	Height 110mm * Length 83mm * Width 30mm
	IP level	IP30
	Net weight	300g
	Installation	Wall mounted, DIN rail