Product introduction: HY11 matting agent belongs to the category of internal equilibrium reaction matting agent (commonly known as                                                       physical matting agent), which does not consume epoxy resin in the matrix. 5:5, 6:4, and 7:3 are suitable for mixed                                                   polyester/epoxy systems

Product advantages: Good resistance to yellowing, smooth and delicate surface, small addition amount, wide selection of polyester.

Product appearance: milky white or light yellow powder.

Product packaging: Polyethylene inner bag, kraft paper packaging.

Product features: 

1. Suitable for polyester/epoxy powder coatings with a gloss of 3% or more (60 °)

2. No consumption of epoxy, physical extinction, wide applicability, and wide selectivity for polyester

3. Excellent performance, low usage, low gloss, outstanding cost-effectiveness

4. The coating surface is very delicate, with excellent resistance to yellowing and mechanical properties

Application: Mix 1-3.2% of the total amount of matting agent in the formula design evenly with other raw materials to participate in extrusion.                              Powder can be produced according to the powder production process. The specific dosage can be determined through                                            experiments.

Storage requirements:1. The storage of matting agents should be stored in a cool, dry, and well ventilated place and sealed.2. Avoid direct                                                    sunlight, high temperature and humidity, and keep away from sources of fire and heat to prevent clumping.