UHMWPE Sheet plate board UHMWPE Sheet PE1000 High Implact Engineering Plastic
Negotiable /Piece
Min.Order:2 Pieces
Shanghai Boyan Machinery Co., Ltd.
UHMWPE Sheet plate board Plastic Sheet 20mm PE 500 Polyethylene Sheet
UHMWPE Sheet plate board 4x8 plastic HDPE sheets UHMW PE product uhmwpe sheet
UHMWPE Sheet plate board 4x8 Plastic Polyethylene HDPE Sheets UHMW PE Product Uhmwpe Sheet
UHMWPE Sheet plate board 4x8 plastic HDPE sheets UHMW PE product recycled uhmwpe sheet
UHMWPE Sheet plate board 100% UHMW PE raw material white and black UHMW PE sheet
UHMWPE Sheet Ultra High Molecular Weight Polyethylene Sheet with High Impact Resistance
UHMW PE is a kind of engineering plastic with medium price and superior properties. It has almost combines all excellent properties of plastics. It has excellent abrasion resistance, high impact resistance, self-lubricating properties ,outstanding ability against cold ,eco-friendly ,and light weight.
Characteristics
-Excellent wear resistance
-Can work under the temperature -200°C to +80°C
-Impact and noise reduction
-Chemical resistant
-No water absorption
-Anti-adhesive
-Food safe
-Light weight
Technical Data Sheet
PROPERTIES | Test Method | Unit | Value |
I.Physical Properties | |||
Density | ISO 1183 | g/cm3 | 0.96 |
Water absorption 24hrs | ISO 62 | % | 0.01 |
II.Thermal Properties | |||
Heat deflection temperature - HDT/A | ISO 75-2 | ºC | 42 |
Min. service temperature | ºC | -269 | |
Max. service temperature-Long Term | ºC | 90 | |
Thermal conductivity at 23 ºC | DIN 11359 | W/(K*m) | 0.42 |
Coefficient of linear thermal expansion | ISO 11359 | 10-4*K-1 | 2 |
Flammability Rating(6mm thickness) | UL 94 | - | HB |
III.Mechanical Properties at 23ºC | |||
Tensile strength at yield | ISO 527-2 | MPa | 17 |
Tensile strength at break | ISO 527-2 | Mpa | 40 |
Elongation at break | ISO 527-2 | % | >50 |
Modulus of elasticity after tensile test | ISO 527-2 | MPa | 650 |
Modulus of elasticity after flexural test | ISO 178 | MPa | 800 |
Hardness - Shore D | DIN 53505 | 61 | |
Charpy impact strength | ISO 179 | kJ/m2 | N. B. |
Friction coefficient | DIN 53375 | 0.25 | |
IV.Electrical Properties at 23ºC | |||
Dielectric constant at 1 MHz | IEC 60250 | 106Hz | 3.1 |
Dielectric loss factor at 1 MHz | IEC 60250 | 106Hz | 0.0001 |
Volume resistively | IEC 60093 | Ohm (Ω) * cm | >1014 |
Surface resisively | IEC 60093 | Ohm (Ω) | >1011 |
Dielectric strength | IEC 60243-1 | kV/mm | 45 |
NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/m |