Mercury in glass thermometer

It is made by more than ten processes such as manual firing and liquid filling. It is cheap, accurate and easy to use. It is widely used in production and life. Round or triangular glass is used as raw material. This product is divided into large, medium and small.

Product Name: Thermometer

Scope of application: Used for measuring human body temperature in medical institutions and households

Measurement range: 35-42 ℃; Minimum division value: 0.1 ℃, allowable deviation range of indication is+0.01 ℃ -0.15 ℃

usage method:

1. Pinch the upper end of the thermometer that has been disinfected with 75% alcohol, and shake the mercury injection to below 35 degrees Celsius without affecting the measurement of body temperature;

2. Place the temperature sensing bulb of the thermometer under the tester's tongue, close the mouth, and take it out for about 5 minutes;

3. Place the thermometer under the tester's armpit, be sure to clamp it tightly and do not move it. It can be removed in 5 minutes;

4. Apply lubricating grease to the sensing bulb of the thermometer, gently insert it into the anus, pinch it with your fingers to prevent slipping out, and remove it after 5 minutes.

Product contraindications: Avoid vigorous exercise, hot drinks, cold drinks, alcohol consumption, etc. before temperature measurement

Matters needing attention:

For individuals who are not suitable for independent use of thermometers (medical), such as preschool children and those without legal capacity, they should use them under the guidance of their guardians or nursing staff;

2. It is recommended for infants and young children to use anal measurement or internal thermometer for axillary measurement;

3. This product has not been sterilized. Please disinfect it with 75% alcohol before use;

4. Due to the thinness of the thermosensitive foam glass, severe vibrations and collisions should be avoided. If the thermometer is damaged, the mercury flowing out should be collected in a timely manner and placed in a sealed container to prevent contamination

Tips:

1. Transportation, storage, or disinfection should not exceed 42 ℃ and avoid severe vibration. Glass thermometers sold (stored) or in use should be stored in dry air, with a relative humidity of not less than 80%, free of corrosive gases, and well ventilated indoors;

If it is found that the mercury injection cannot be thrown down, it only needs to be thrown below 35 ℃ without affecting its use;