★ Product Features
PLA is made from imported, stable PLA raw materials compounded with a minor amount of toughening agent, and achieved through stable extrusion molding.It exhibits moderate melt fluidity and basically retains the essential performance of pure PLA. This filament is suitable for printing conventional PLA models without special requirements. PLA production has good aging resistance. Its performance loss does not exceed 25%, even after 3 years in storage, and the surface of the wire is smooth.
Conventional PLA filaments are suitable for printers equipped with PTFE tubes integrated into the traditional throat. After opening the packaging of filaments, do not loosen the thread ends, in case to prevent them from sticking into the wire roll and causing winding during the printing process. At the same time, do not overwind the online material in the printer to avoid wire breakage.
★Printing Parameters
·Filament Diameter: 1.75mm · Tolerance: ±0.05mm
·Printing Parameters
1.Long-distance Wire Feeding Printing
·Printing Temperature: 210-225℃ Recommendation Temperature: 215℃
·Heated Bed Temperature: 30-60℃
·Summer: 30-40℃ ·Winter: 55-60℃ ·Special Bed Temperature: 60℃
·Printing Speed: 30-60mm/s ·Retraction Distance: 0-6mm/s
·Retraction Speed: 45-80mm/s ·Idling Speed: 70-100mm/s
2.Short-distance Wire Feeding Printing
·Printing Temperature: 215-225℃ Recommendation Temperature: 215℃
·Heated Bed Temperature: 30-60℃
·Summer:30-40℃ ·Winter:55-60℃ ·Special Bed Temperature: 60℃
·Printing Speed: 30-60mm/s ·Retraction Distance: 0-6mm/s
·Retraction Speed: 45-80mm/s ·Idling Speed: 70-100mm/s
·Net Weigh: 1KG/ roll ·Gross Weight: 1.3KG/ roll
·Length：1.75MM(1KG)=335M 2.85MM(1KG)=125M
