CNC Vertical Lathe, buy CNC Double Column Vertical Lathe for turning only on China Suppliers Mobile

Product Details

Introduction

CNC Double Column Vertical Turning Lathe Machine is a high-tech mechanics products with high Dynamic and static rigidity, safe and reliable movement, long service life and high processing efficiency, which has adopted the advanced design and manufacturing technology both at home and abroad, implement the latest national Precision standards, equipped advanced function units. A strong cutting of Structure Performance has been achieved.

Parameter

The vertical lathe can be equipped with C axis

Item	Unit	CK5225	CK5235	CK5240	CK5250
Max. Turning diameter	mm	2500	3500	4000	5000
Max. Workpiece height	mm	1600/2000 /2200	1600/2000/ 2200	1600/2000/ 2200	4000
Worktable diameter	mm	2250	2850	3150	4500
Max. Worktable weight	t	10/16	10/16/20/32	10/16/32 /40/50/63	32/40/50 /63150
Worktable rotation step		stepless	stepless	stepless	stepless
Worktable rotation speed	r/min	2~63	2~63	2~63	0.32~32
Max. Worktable torque	KN	63	63	63	150
Max. Turning Torque of Tool post	KN	53	53	53	63
Right tool feeding range	mm/min	0.25~90	0.25~90	0.25~90	0.10~500
Right tool post rapid movement	mm/min	1550	1550	1550	4000
Left tool post rapid movement	mm/min	5000	5000	5000	4000
Left tool post feeding range	mm/min	1-2000	1-2000	1-2000	0.10~500
Swing angle of tool post		±30º	±30º	±30º	-
Tool section	mm	40×50	40×50	40×50	280x280
Ram section	mm	-	-	-	-
Beam travel	mm	1250/1650/1850	1250/1650/1850 /2150/2800	1250/1650/1850/ 2150/2800/3500	2150/2800/3000 /4500
Beam lifting speed	mm/min	350	350	350	410
Main motor power	kW	55	55	55	75/90
Weight	t	41	45	47	200

Item	Unit	CK5263	CK5280	CK52100	CK52125
Max. Turning diameter	mm	6300	8000	10000	12500
Max. Workpiece height	mm	4000	4000	4000	5500
Worktable diameter	mm	5700	7100	7500	7500
Max. Worktable weight	t	63/80 /100/150	100/125/150	150/250	250
Worktable rotation step		stepless	stepless	stepless	stepless
Worktable rotation speed	r/min	0.32~32	0.32~32	0.2~20	0.16～16
Max. Worktable torque	KN	150	150	640	640
Max. Turning Torque of Tool post	KN	63	63	125
Right tool feeding range	mm/min	0.10~500	0.10~500	-	0.10~500
Right tool post rapid movement	mm/min	4000	4000	4000	4000
Left tool post rapid movement	mm/min	4000	4000	4000	4000
Left tool post feeding range	mm/min	0.10~500	0.10~500	-	0.10~1000
Swing angle of tool post		-	-	-	-
Tool section	mm	280x280	280x280	80x80	100x100（Max）
Ram section	mm	-	-	320x320	400x400
Beam travel	mm	3000/3500/4500	3000/3500/4500 /5000	3250/3750/4500 /5000	4000/4500/5000
Beam lifting speed	mm/min	410	410	300	300
Main motor power	kW	90	90/132	132	132
Weight	t	215	-	-	465

Product Advantage

1. Gear Box

CNC Double Column Vertical Turning Lathe Machine use gear made of 40 Cr through High-frequency Quenching treatment, the Hardness reaches HRC40-45

2. Feeding system

An AC servo motor drives the feed system (X-axis, Z-axis).

3. Bed

The bed is an integral structure, the material is made of high-strength low-stress cast iron, and effective vibration reduction measures are adopted.

4. Gantry frame

To be suitable for strong cutting, the cross beam guide adopts high hardness and hardened hard guide

5. Crossbeam

The contact surface of the beam and the column guideway is glued with PTFE wear-resistant guideway soft belt, which has a small friction coefficient

6. Working table

CNC vertical Turning Lathe has an entire part of the worktable of thermal symmetry, and the main transmission mechanism is installed on the base of the worktable and the bed.

7. CNC system

The CNC system uses Siemens or FANUC. It can realize X.Z.C axis digital control and two-axis linkage.