Hot Selling 30MW Solar Panel Production Line
Negotiable /Short Ton
Min.Order:1 Short Ton
ChinTiyan New Energy (Hubei) Co., Ltd
Turnkey solution
Compatible size
a. standard length 1640-2200mm,width 950-1200mm;
b. other specs customized
Compatible module
a. 5BB,MBB,IBC,MWT,HJT,N-TYPE
b. full-cell,half-cut,shingling
c. framed,framed(no C side),frameless
d. glass-backsheet,dual-glass/bifacial,ultra-light,thin-film module
Many customers want to build solar cell production, but they don't know what reliable solar equipment suppliers are, and we are the best choice.
So, How to Build 10MW Solar Panel Production Line?
Process of Making Solar Panels:
Step Working Content Device Name Remark
1 Test solar cell efficiency:
make sure same power cell to be used in one solar panel. Solar Cell Tester Offline
2 Cut Complete solar cell into small pieces.
This machine use to produce small solar panel from 3w-140w.
Big size solar panel from 150w-310w use complete solar cells. no need to use this machine Solar Cell Laser Scribing Machine Offline
3 Automatic welding solar cell:
Except manual welding, you can also use the Automatic machine welding solar cell to string solar cell. Automatic Solar cell tabber stringer
4 Automatic layup:
Automatic layup the string cells from the tabber stringer. Automatic Layup
5 Cutting EVA/TPT
according to the solar panel size to cut the EVA and TPT in the designed size. Automatic EVA / TPT Cutter Optional
6 Online busbar ribbon welding
Lay up the EVA and TPT, Manual welding the busbar ribbon Online busbar ribbon welding station
7 Visual inspect
Check the dirty for the Raw materials by the mirrors Visual Inspection Work station
8 Defect check:
uses the EL tester machine to identify micro-cracks, broken finger wires, and other invisible defects in solar modules. Automatic EL Defect Tester
9 Lamination:
After EL tester checks the defects, use solar panel Laminate the raw material into solar panel. Automatic Solar panel laminator
10 Trimming:
When the Solar panel gets cooling after coming out from laminator, It need Cutting the edges, we call Trimming Trimming worktable
11 Glue
Use sealant to glue up on aluminum frame Air glue gun
12 Framing:
Use the framing machine to install the aluminum frame Online Semi-automatic solar panel Framing Machine
13 Glue:
Fill the sealant to aluminum alloy after framing Air gun
14 Install junction box
Glue the junction box and install it on the solar panel. Manual
15 IV Test:
Use the solar panel tester to test the finished solar panel Electrical performance test like power, current etc and record Solar Panel Tester/
Solar Simulator Offline
16 Label
17 Test the panel withstand voltage insulation Withstand Voltage Insulation Meter
18 Cleaning the surface and package
30MW Solar Panel Production Line Including the following products:
· Solar Cell Power Tester
· Solar Cell Laser Cutting Machine
. Solar Stringer Machine
· Solar EL Tester
· Solar Laminator
· Solar Framing Machine
. IV Tester