drill bit, buy tricone drill bit for oilfield on China Suppliers Mobile

Product Details

Product descriptions from the supplier

Soft formation TCI tricone bits:
The soft formation TCI tricone bits are used to drill low compressive strength, very soft formations. This bit maximized to use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations. 

Medium formation TCI tricone bits:
The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations. The HSN rubber O-ring provides adequate sealing for bearing durability.

Hard formation TCI tricone bits:
The hard formation TCI tricone bits can be used to drill hard and abrasive formations. Wear resistance tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical shaped inserts are used in all rows to provide cutter durability and long life.

Products Description

IADC	WOB	RPM	Applicable Formations
	(KN/MM)	(r/min)
	(Bit Dia)
116 117	0.35~0.8	150~80	Very soft formations with low compressive strength and high drillability,such as clay,mudston,chalk etc.
136 137	0.35~1.0	120~60	Soft to mesium soft formations with low compressive strength and high drillability.such as medium soft shale,hard gypsum,medium soft dium soft sandstone soft formation with harder nterbeds,ect.
216 217	0.4~1.0	100~60	Medium hard formations with high compressive strength,such as medium soft shale,hard gypsum,medium soft limestone,medium soft sandstone,soft formation with harder interbeds ect.
246 247	0.4~1.0	80~50	Medium hard formations with high compressive strength,such as abrasive shale.limestone,sandstone,dolomite,hard gypsum,marble,ect.
417 437	0.35~0.9	150~70	Very soft formations with low compressive strength and high drillability,such as clay,mudston,chalk,gypsum,salt,soft shale,soft limestone,etc.
447
517 527	0.35~1.0	140~60	Soft formations with low compressive strength and high drillability,such as mudstore,gypsum,salt,soft ft limestone,ect.
537 547	0.45~1.0	120~50	Soft to medium formations with low compressive strength,such as medium soft shale,medium soft limestone,medium soft sandstone,medium formation with harder and abrasiver interbeds,ect.
617 627	0.45~1.1	90~50	Medium hard formations with high compressive strength,such as hard shale,limestone,sandstone,dolomite,ect.
637	0.5~1.2	80~40	Hard formations with high compressive strength,such as sandstone,limestone,dolomite,hard gypsum,marble,ect.