Product Details

HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.

Performance of the project		Test condition [condition]	The test data	The data unit
Basic performance	Density mass index		0.948±0.002	g/cm3
	Density test results		0.948	g/cm4
	Melt flow rate mass index	190ºC/5.0kg	0.23±0.03	g/10min
	Melt flow rate test results		0.25	g/10min
	Melt flow rate mass index	190ºC/21.6kg	6.2±1.5	g/10min
	Melt flow rate test results		6.4	g/10min
Mechanical properties of	Tensile yield strength quality index		≥23	MPa
	Test results of tensile yield strength		27.6	MPa
	Elongation at break quality index		≥600	%
	Test results of elongation at break		804	%
	Quality index of impact strength of simply supported beam		≥25	KJ/m2
	Test results of impact strength of simply supported beam		26.7	KJ/m2
Other properties	Volatile matter quality index		≤350	mg/kg
Other properties	Volatile test results		Did not check out	mg/kg
Biochemical property	Cleanliness (color granule) quality index		≤20	grain/kg
	Cleanliness (color particle) test results		0	grain/kg
	Cleanliness (impurities) quality index		≤60	grain/kg
	Cleanliness (impurities) test results		0	grain/kg