Large removable swimming pool Steel structure parent-child swimming pool
USD $20 - $40 /Square Meter
Min.Order:100 Square Meters
Guangzhou Tianlang Amusement Equipment Co., Ltd
The conventional shape of the disassembled swimming pool is rectangular, and it can also be customized to adapt to the size of the site according to the size of the site
1, long service life: the disassembly type of the overall swimming pool with galvanized steel is durable, swimming pool waterproof system with special waterproof film, beautiful and generous, waterproof up to 15 years!
2, fast installation, easy to error: automated production, standardized components, process installation, construction time is one-fifth to one-third of the traditional swimming pool.
3, fixed cost: the construction time is short, the system structure is fixed, so that you do not need to worry about cost overruns caused by construction.
4, a high level of completion of the process: we pursue the best to the United States, for you to build a durable, beautiful swimming pool.
5, a small amount of maintenance, easy to clean, take care of: only a small amount of maintenance costs and maintenance work can return you a beautiful, clean swimming pool, solve your worries!
Assembled swimming pool steel structure Assembled swimming pool frame structure Frame swimming pool coaming pool removable pool steel structure Disassembled swimming pool Outdoor steel structure pool
Large removable swimming pool Steel structure parent-child swimming pool
1, the use of steel structure frame, all steel structure bearing frame are hot-dip galvanized anti-corrosion treatment, to ensure that the frame does not rust for 15 years, to ensure that the pool body does not deformation.
2, should be set around the pool overflow tank, made of anti-corrosion and rust-proof material to ensure the service life of more than 15 years. The overflow tank shall be provided with a drain outlet, which can discharge waste water into the sewer, and the overflow tank shall be covered by a grate. After the bearing capacity test (240kg vertical force applied on an area of 250mm×100mm), there should be no fracture, damage, and there should be no regular deformation after unloading.
3, the corridor bearing beam is made of steel structure, the need for hot-dip galvanized anti-corrosion treatment, to ensure that no rust, no deformation for 15 years.
4, the walkway adopts plastic wood floor, the thickness of plastic wood floor is required to be ≥25mm, the gap should be less than 8mm, firm and stable, and the force cannot float. After the bearing capacity test, there should be no fracture, damage, and no regular deformation after unloading.
5. The four corners of the swimming pool overflow tank are equipped with safety devices, which require safety, beauty, non-slip and durability.
6, the inner panel adopts PVC plate with thickness ≥30mm, or galvanized steel plate with thickness ≥2mm, in line with the national standard GB/T28939-2012, after the bearing capacity test (300kg vertical force applied on the area of 250mm×100mm), there should be no fracture, damage, and no regular deformation after unloading.
7, safety guardrail must meet the national standard GB/T28939-2012, guardrail form should be grille type (gap less than 89mm) or fully enclosed, and prevent users from standing, sitting on the guardrail and climbing, guardrail point to the pool floor distance should be ≥1100mm. The guardrail should be easy to disassemble without affecting the secondary installation, requiring safety and beauty.
8, the peripheral board must meet the national standard GB/T28939-2012 requirements of safety, beauty, stability
9, a main staircase. It must meet the national standard GB/T28939-2012, the width is not less than 2.4m, and the guardrail should be used on both sides for protection. It should be safe, beautiful and non-slip. Bearing capacity: Apply 240kg vertical force on any 250mm×100mm area of the step, there should be no fracture, damage, and no regular deformation after unloading
10, the pool body adopts imported special swimming pool film, the thickness is required to be ≥0.75mm, the need to provide customs declaration and other certification materials, the joint adopts special process splicing, no leakage phenomenon, the hands tear, the film should not be torn.
11, the external decorative strip, the external footboard requirements beautiful, non-slip.
12. Other supporting facilities are required to be safe, beautiful, stable and reliable.
Large removable swimming pool Steel structure parent-child swimming pool