OTS3000-EDFA Erbium Doped Fiber Amplifier is different from OEO and can directly amplify the signal of multi-wavelength from the C-band to effectively extend the transmission distance when the optical signal is not enough to meet the requirement of the optical transmission distance. EDFA can work with other function cards (such as DWDM,OADM,DCM and OTU)together to construct the complete optical network transmission system.
Features
·Modularized design, Compact size, Support hot Plug.
·High gain, Low noise, Low gain flatness.
·Adjustable gain.
·Gain can be adjustable. Working mode options: APC, AGC, ACC etc.
Applications
·Fiber backbone network long-distance transmission amplification.
·Optical signal power amplification before optical signal split flow.
·Optical signal power amplification before the optical equipment receive it.
Parameters | Unit | OTS3000-BA | OTS3000-LA | OTS3000-PA |
Dimension | mm | 160×200×21(WxDxH) | ||
Max Power Consumption | W | 15 | ||
Input Power | dBm | -15 ~ 8 | -30 ~ -5 | -30 ~ -5 |
Gain | dB | 15 | 24 | 18 |
Saturated Output Power | dBm | 16 | 13 | 13 |
Wavelength Range | nm | 1529 ~ 1564 | ||
Flatness | dB | ≤ 1.5 | ||
Noise Figure | dB | ≤ 5.0 | ||
Input/ Output Pump Leakage | dBm | ≤ -40 | ||
Return Loss | dB | ≤ -45 | ||
Input/Output Isolation | dB | ≥ 30 | ||
Polarization Dependent Gain | dB | ≤ 0.3 | ||
Polarization Mode Dispersion | ps | ≤ 0.5 | ||
Working Mode | AGC/APC/ACC | |||
Connector Type | LC/PC | |||
Operating Temperature | ºC | -5 ~ +55 | ||
Storage Temperature | ºC | -20 ~ +70 | ||
Relative Humidity | 5% ~ 95% (non-condensing) | |||
Ordering Information: OTS3000-A-B-C-D-E-F
A:Amplifier Type | B:Saturated Output Power | C:Max Gain | D:Input Power Range | E:Connector Type |
BA: Power amplifier LA: Line amplifier PA: Pre-amplifier X: Others | 16: Max +16dBm 13: Max+13dBm X: Others | G24: Max 24dB G18: Max 18dB G15: Max 15dB X: Others | A:-15 dBm ~ +8 dBm B:-30 dBm ~ -5 dBm X: Others | LP: LC/PC X: Others |